Why is there no water in my water softener tank?

This could be due to a clogged drain line/control, injector/venturi or brine line/valve. It might also be that the valve assembly in the salt tank cannot move or that water pressure in your house is too low (measure and adjust accordingly). Any blockages have to be removed.

Is there supposed to be standing water in my water softener?

Although you may need to add a bag of salt in the near future, it’s nothing to cause alarm. However, standing water can also be a sign of a problem. The components that regulate water intake might be allowing the tank to overfill, or water is not being drawn down after regeneration.

How does the Kenmore 300 series water softener work?

Kenmore 300 Series Water Softener – High Efficiency Model 38300. This unit comes with something called “IntelliSoft2”. This feature allows the unit to use up to 20% less water and 32% less softening salts. Its automatic salt tank light (LED) informs you when and if the tank needs replenishment with new softener salt.

Do you need to be a plumber to use a Kenmore softener?

Kenmore water softeners are DIY friendly. They come ready to be installed by anyone with basic knowledge of plumbing. This also means that they are easy to maintain and repair without the need for an expert or professional plumber. Here are the top Kenmore water softening products that are available today.

What is error code 3 on Kenmore water softener?

Kenmore Error Code #3: If you are getting an Error code 3, it may be that the switch (pictured below) needs replacing. Here are the steps to replace this switch: Step 1: Unplug the unit. Step 2: Remove the lid of your softener so you can see the motor.

How to troubleshoot a Kenmore water softener switch?

Here are the steps to replace this switch: Step 1: Unplug the unit. Step 2: Remove the lid of your softener so you can see the motor. Step 3: The problem may be a faulty switch – unscrew the metal plate at the top of your unit being careful not to dislodge the gasket in the center of the plate.

What to do if you have a problem with your Kenmore water softener?

If you have a problem with your Kenmore water softener the first thing you should do is check to see if the repair will be under warranty.

How big is a Kenmore grain water softener?

Here are some specifications and features that come with the Kenmore 31,000 grain water softener – elite hybrid series: The unit dimensions are 21” x 48” x 1.25”. Does not need a filter to generate soft water. Automatic salt tank light (LED) which indicates when the tank needs to be replenished with a new supply of softener salt.

Kenmore Error Code #3: If you are getting an Error code 3, it may be that the switch (pictured below) needs replacing. Here are the steps to replace this switch: Step 1: Unplug the unit. Step 2: Remove the lid of your softener so you can see the motor.

Where can I buy Kenmore water softener in Ontario?

Since Sears has closed and you can no longer take your product directly into a store for maintenance or repair, we can help. You can trust WaterSmart to service your Kenmore water softener in Southern Ontario, as we have been proudly servicing Kitchener, Waterloo, Cambridge and Guelph for 25 years.