Why is the blue light flashing on my Moen kitchen faucet?

The blue light indicates that you are in electronics mode. It will come on for two seconds whenever electronics mode is activated. The light will also flash rapidly to indicate battery life is low when using batteries to power the faucet. The blue LED will flash rapidly to indicate batteries require replacement.

Why is my Moen sensor faucet not working?

Ensure that the data cable and power source cable (battery pack or AC adapter) are plugged in tight and secure. Check Batteries: If using a battery pack, ensure the batteries are installed correctly and are snug in the battery holder. Lithium batteries are not recommended. Restore the faucet to factory settings.

How do I reset my touch faucet?

Locate the reset button, if any, on or near the battery compartment, after changing out batteries. Push the red reset button to reset the faucet. Test the faucet to ensure the reset corrected the problem.

How long do batteries last in touchless faucet?

How often the does the battery need to be changed? Touchless faucets are powered by lithium batteries, which release power evenly and enable longer battery lifetime. “Battery changing frequency depends mainly on level of use. On average, one battery lasts about two years.

Why did my Moen faucet stop working?

Ensure that the data cable and power source cable (battery pack or AC adapter) are plugged in tight and secure. Check Batteries: If using a battery pack, ensure the batteries are installed correctly and are snug in the battery holder. Loose batteries can cause the faucet to operate erratically.

Will Moen faucet work without batteries?

Battery or AC power is needed to operate the faucet in electronic or manual mode. In addition, please note that when using the AC Adapter, we recommend plugging it into an outlet that is not controlled by an ON/OFF switch.

Why is the blue light blinking on my Moen faucet?

The reason for the blue light to blink or flash on a Moen faucet is usually due to low batteries. The most common reasons for the Moen faucet blue light to be blinking are: Moen blue light blinking slow indicated the batteries are low. Replace them with 6 new AA batteries.

What to do if your Moen faucet is not working?

The Moen MotionSense faucets have a battery pack located under the sink. Simply locate the battery pack and remove the cover. Install 6 AA size new batteries and re-install the cover. As seen above, when the blue light at the base of the spout starts flashing, this indicates the batteries need to be replaced.

How can I tell if my water faucet battery is low?

The first thing to do is look at the light that is on the base of the faucet. This LED light will turn blue when the water is actively coming out cold and red when the water is actively coming out hot. But when the water is off, if the red light starts flashing every five seconds, you have low battery.

Is the Moen motionense powered by a battery?

MotionSense is powered by a battery pack, but offers the option of an AC adapter. Under-cabinet controls allow you to easily adjust the desired preset water temperature of the hands-free mode. If service is ever required, a diagnostic light will flash in different sequences to pinpoint the problem.

What does the blue light on Moen faucet mean?

Replace them with 6 new AA batteries. Moen blue light blinking fast indicates the batteries are dead, replace them with 6 news AA size. When power has been restored to the Moen MotionSense faucet, the sensors will calibrate. This means the blue light will flash, water will run for a few seconds and then turn back off.

The Moen MotionSense faucets have a battery pack located under the sink. Simply locate the battery pack and remove the cover. Install 6 AA size new batteries and re-install the cover. As seen above, when the blue light at the base of the spout starts flashing, this indicates the batteries need to be replaced.

MotionSense is powered by a battery pack, but offers the option of an AC adapter. Under-cabinet controls allow you to easily adjust the desired preset water temperature of the hands-free mode. If service is ever required, a diagnostic light will flash in different sequences to pinpoint the problem.

What to do if your motionense faucet loses power?

* Optional AC Service Kit Adaptor (SKU #169031) available as substitution. Regular handle operation won’t be interrupted by a power outage or battery failure. If you experience a power outage or your batteries run out of power, use the manual handle to control your faucet until power is restored or batteries are replaced.