Why is my Rinnai Infinity 26 not running hot water?

If you lose the flame on the stove top whilst running the hot water – you probably have a gas supply issue. Fourth – Check your water flow. Someone may have bumped the tap to the Infinity 26. Try opening your tap more. Fifth – Isolate your water and then clean the filters and water restrictor.

Do you need temperature controller for Rinnai Infinity?

There can be a number of issues that can cause the symptoms you are reporting. The unit does need to have sufficicent water flow to ensure the hot water unit works correctly. If you have temperature controllers, make sure to choose the temperature required and only turn on the hot water tap.

When does the gas enter the Rinnai Infinity?

The gas does enter the Infinity after the sparker is going, combustion should start almost instantly. There is likely to be a miniscule amount of unburnt gas able to be detected in the flue, just prior to combustion…hence the smell. Just had a Rinnai B20 installed. The water comes out cold then goes hot and then continues the cold/hot cycle.

What do you need to know about Rinnai hot water heater?

All Rinnai products are designed and manufactured according to strict quality standards. However, should you have any problems with your hot water system you will need to contact a licenced gas fitting technician. In New Zealand, gas fitting relates to any work that involves installing, altering or repairing gas appliances.

What should I do if my Rinnai controller is not working?

If a controller is fitted check that it is on also) Check gas supply (Turn gas stove top on then turn hot water tap on. If flame drops on stove this shows it is possibly a gas supply issue) Is there enough water flowing? (Try opening tap further or turn another tap on as well) Are there any error codes displayed on controllers?

How long is the warranty on Rinnai Infinity 26?

Due to the age of unit it is cheaper to totally replacement of the unit at which I have gone with a Rinnai builder’s series 26 60 degree unit with extended warranty for 15 years on heat exchanger and installation of 2 controllers to extend warranty to 5 years.

Can a service technician work on a Rinnai Water Heater?

Since Rinnai water heaters are one of the most advanced tankless water heaters available, we recommend to contact a service technician that’s authorized to work on Rinnai water heaters.

What is error code 63 on Rinnai Water Heater?

Error Code 63 Check if the tankless is producing a water flow using the temperature controller by pressing the “UP” button for 3 seconds and then the “ON/OFF” button. If the flow rate was below 1.3 gpm, bleed the air from the pump and system tank.

What’s the difference between the Rinnai B26 and Infinity 26?

Rinnai B26 is around $800-950 and Rinnai Infinity 26 between $1000-1350. Installation costs are exactly the same. 2: The colour is different. Rinnai Infinity 26 is now nice white. The Rinnai B26 is greyish brown or Dune. Not as bad as it sounds. It does look a little different. Infinity is more up market in appearance.

How many Rinnai hot water systems have I installed?

Contacts I have been plumbing for over 20 years now and have installed around 1000 Rinnai gas hot water systems. I have also been very fortunate to work for so many lovely customers which to my knowledge have been very happy with my service.

Is there an extended warranty on the Rinnai B26?

Regarding the extended warranty then yes the Warranty is 10 years less on the Rinnai B26. It has a 15 year warranty. The Infinity has a 25 year warranty. If the Rinnai passes the 2 year mark with no problems you are in the clear for a very long time. They are both excellent. All of the Rinnai’s we have replaced are over 20 years old.

What should the temperature be on Rinnai Infinity 26?

Rinni Infinity 26 temperature adjustment is part of our service. This system supplied on this job was set at 50 degrees. We increased the temperature from 50 to 55 degrees as per request. Other Rinnai systems are known as non preset models and are set to 60 degrees.

Why is my Rinnai Infinity 26 hot water line leaking?

If after you turn the Hot water on, the flame on the stove drops, its the Regulator. I found that out after I replace the System 26 Infinity. I had the Regulator replace last year, as it was leaking and took in moisture. The Plumper never Cleared the Line before replacing it. So I am out $850 for the new system.

How many showers can you take with Rinnai B26?

Hi, our brand new Rinnai B26 is giving us Lukewarm water, which is unbearable in cold weather. We were told by the company that we can use 3 showers at a time but we are not even satisfied by 1 shower at a time, the water gets cool from Lukewarm very quickly, please help what to do?

What makes a Rinnai tank less hot water heater work?

The venting system must be able to provide enough fresh air for proper combustion. Rinnai tank less hot water heaters like the Infinity 26 will have a self-diagnosis program for when issues arise. Any issue that is recognised will flash with a fault code.

How is the Infinity 26 hot water system rated?

Customise and complete your Infinity 26 system with our comprehensive range of hot water controllers to enhance your experience Compatible with low flow rated shower fixtures (3 Star – 7.0 to 9.0 l/min) * Independently calculated using Australian Standard AS5263.1.2.

Is the Rinnai Infinity 26 touch hot water system wireless?

In another touch of Rinnai genius, we have incorporated Australia’s favourite continuous flow hot water system with our unique wireless temperature control – perfect for 1-2 bathroom homes (1-3 in warmer climates). Unparalleled in performance, the Rinnai Infinity 26 Touch is ready to be easily installed and enjoyed.

What’s the temperature of a Rinnai 26 litre hot water heater?

Here we have a Rinnai Infinity 26 litre continuous flow hot water heater for sale. Available in Natural Gas and LPG, with temperature preset of 50°C or 60°C. Temperature Preset: 50°C or 60°C.

How many stars does a Rinnai hot water system have?

S5263.1.2 limits the rating shown on the energy label to 6.0 Stars. Where the calculated rating of Rinnai appliances exceeds 6.0 Stars it is designated as an “equivalent” rating.