Why does my gas heater keep cutting out?

If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.

How often should I Have my Rinnai Water Heater serviced?

There are two types of periodic maintenance that your service technician should perform to keep your Rinnai tankless water heater in top shape. It’s important to note, the time in between necessary maintenance will depend on the water quality in your home. 1. The in-line screen filter should be checked periodically for debris and cleaned. 2.

How long does a Rinnai gas boiler last?

For small- to medium-sized new homes or remodels, Rinnai’s high-efficiency models are affordable, compact units you can count on. Need a replacement? Rinnai’s hybrid models are Ultra Low NOx (ULX) compliant, have 82% recovery efficiency and last much longer than a stand-alone tank.

How to troubleshoot a Rinnai tankless air unit?

Turn off gas valve feeding the appliance.  Unplug igniter wire; hold the igniter wire with an insulated pair of pliers about a 1/4″ from a piece of metal.  Cycle the unit to ensure you see a spark when unit is cycling.

Why does my Rinnai Water Heater have code 10?

Remove burner and inspect copper fins in heat exchanger for a build up between fins.  This will cause air flow restrictions which can lead to code 10’s.  If build up is present, you will need an air compressor capable of delivering 120 psi of air to blow out the burner and heat exchanger fins.

What to do when your Rinnai Water Heater says error code 11?

Here is the summary of what can go wrong with your Rinnai water heater and what to look for after the error code 11 shows up on the remote controller. This includes the following: Make sure that there is no interruption in the gas supply to the water heater.

How do you turn on a Rinnai Water Heater?

How to operate a Rinnai water heater Turn the gas valve clockwise to the ‘On’ position. Switch on power to the water heater by pressing the power button. Set your desired water temperature on the thermostat using the ‘Hot water temp’ up and down buttons.

For small- to medium-sized new homes or remodels, Rinnai’s high-efficiency models are affordable, compact units you can count on. Need a replacement? Rinnai’s hybrid models are Ultra Low NOx (ULX) compliant, have 82% recovery efficiency and last much longer than a stand-alone tank.

 Turn off gas valve feeding the appliance.  Unplug igniter wire; hold the igniter wire with an insulated pair of pliers about a 1/4″ from a piece of metal.  Cycle the unit to ensure you see a spark when unit is cycling.