Why does my boiler pilot light keep going off?

Usually, a problem with the thermocouple causes the pilot light to go out. The thermocouple is the small copper rod that the pilot light hits. Common thermocouple problems include: Dirt/soot on the thermocouple– Any buildup on the thermocouple can block the flame, preventing it from being properly heated.

What is the pilot light on a boiler?

What is a Pilot Light? The pilot light is an important component of all older furnaces and boilers. The pilot light is the flame that lights the gas provided by the main burner. A small amount of gas is constantly released from the gas pipe, meaning that the flame lights the gas and it permanently burns.

How do I light the pilot on my boiler?

Turn the gas control knob to the “pilot” position, then press down on the knob. Pressing down on the knob will release gas into the pilot light orifice. Insert a lit fireplace match or a butane candle lighter into the access hole and light the pilot light. Keep holding down the control knob button as you do this.

How can I Fix my britony 2T pilot Problem?

As your gas tech will have to remove the case,a new case seal (some times called a gasket) may be required it will be examined very carefully (i hope) before case refitting,maybe search availability of this seal before calling a repair person. good luck. Thanks everyone. Problem fixed by fitter.

What should I do if my furnace pilot light keeps going out?

If you’re having trouble locating the pilot or thermocouple, double-check to make sure your unit actually has a standing pilot light. Standing pilot lights are common in older furnaces, but many newer furnaces have intermittent pilot lights or hot surface igniters.

Where is the thermocouple on a furnace pilot light?

No matter the pilot configuration, the thermocouple will be near the burners—look for a removable metal rod nearby. Locate the copper rod near the burners. This is the thermocouple. If you look very closely, you’ll find the thermocouple tucked in behind the burners.

Why does my pilot light keep going out?

Under constant exposure to a hot flame, a thermocouple wears down over time. Even a slight residue can make the thermocouple malfunction. The fix here is as easy as removing the thermocouple, cleaning it with a wire brush or something coarse (even an ordinary dollar bill works), and replacing.