Why does a toilet still leak after putting a new ring on it?

If your toilet is still leaking at the base even after you have tightened or replaced the bolt, the wax ring may be the culprit. The wax ring seals the toilet to the floor to prevent the seepage of dirty water. Over time, this seal can disintegrate or become useless when the T-bolts become loose.

Can a gravity feed toilet be installed in the same place as an existing toilet?

The majority of homes are fitted with gravity-feed toilets. If you are replacing an existing toilet, it’s highly likely that your toilet will be this type. When installing an identical toilet in the same position as the old one, the water supply and waste pipe can simply be hooked up, and the toilet fitted quickly.

What do you need to know when buying a new toilet?

When you are buying a toilet or replacement wax ring, check to make sure that it comes with extra nuts and washers, or buy an extra pack while you are at the store (they are sold in inexpensive sets). If you are using a toilet flange extender, you must bolt the extender to the original flange.

Do you need to put shims on a toilet before bolting it down?

The location and the number of shims needed depend on the toilet and the floor; every situation is different. Getting the toilet shimmed before bolting it down will ensure it does not come loose in the future. Once the toilet stops rocking, you can bolt it down with a nut and washer on each closet bolt.

Why does it cost more to install a new toilet in the same room?

When installing an identical toilet in the same position as the old one, the water supply and waste pipe can simply be hooked up, and the toilet fitted quickly. Using a different type of toilet or cistern, or moving the position of the toilet within the room will take longer and cost more.

Is it easy to install a new toilet?

Installing a new toilet is a lot easier than you may think. In fact, many homeowners choose to remove their old toilet and replace it with a new one without the help of a handyman or plumber. If you do decide to making installing a toilet…

When to replace the handle on a toilet?

Not only is it integral to the function of the toilet, but the style and finish of the handle should also coordinate with the rest of the bathroom faucets and fixtures. If your toilet handle is corroded or out of date, replace it with a new one to keep your bathroom functioning in style.

What’s the best way to replace an old toilet?

Place the old toilet on a soft, absorbent material, such as an old rug or stack of newspapers, to prevent staining your flooring. Gently lay the toilet on its side or back, making sure the porcelain tank and bowl are supported. Remove the wax ring and plumber’s putty from the bottom of the toilet, using a putty knife .

Where is the toilet supposed to be in relation to the floor?

As a licensed master plumber I would say the answer is in the code, where the fixture comes in contact. 99% of properly installed toilets have a small gap between the finished floor and the toilet base so the fixture is not in contact with the floor.