Why do I have to replace my Symmons shower diverter spindle?

Hi,I have just replaced my… Hi,I have just replaced my Symmons Temptrol shower diverter spindle again (TA-25A) because of a leak and now have a new problem. I have to replace this diverter spindle every year or so because the plastic on the end by the o-ring cracks and it leakswater down thru the first floor ceiling.

What is the limit stop on a Symmons shower valve?

All Symmons pressure-balancing shower valves come equipped with a handle limit stop to set the handle rotation. The limit stop is used to limit the valve handle from being turned to excessively hot water discharge temperatures. CAUTION: Never remove this screw without turning off the hot and cold water supplies.

How to order replacement parts for a Symmons product?

Refer to the Installation and Operation Instructions (.pdf document) associated with the product to view and/or print the parts breakdown to determine the appropriate replacement parts, or call 1-800-SYMMONS (796-6667) or email us at [email protected] for further assistance. How do I order replacement parts for a Symmons product?

Why is my Symmons pressure balancing shower not working?

All Symmons pressure-balancing shower valves come equipped with a handle limit stop to set the handle rotation. If you are not having a problem with hot water elsewhere in the house, it is possible that the limit stop feature has been set too low, or the incoming supply temperatures have changed requiring an adjustment of the limit stop.

Do you have to turn off water to adjust shower handle?

It is not necessary to turn off the water to set or adjust the handle limit stop. CAUTION: Never remove this screw without turning off the hot and cold water supply. To set the shower valve handle limit stop, remove the screw holding on to the handle and remove the handle. Remove the round dome cover by turning in a counter-clockwise direction.

How to replace diverter valve Symmons Temptrol YouTube?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: dbXpRb0v5ysAkef4)

Who is the master plumber for Symmons plumbing?

Answered in 3 minutes by: 8/29/2009 Plumber: Rick, Master Plumber replied 11 years ago Rick, Master Plumber Category: Plumbing Satisfied Customers:34,328 Experience: Licensed Master plumber with 50+ yrs. experience. Verified Hi,It sounds like you put a diverter for a shower only valve into a tub/shower valve.

What’s the difference between Hampton and Symmons valve?

Their Colony or Reliant valve is inexpensive. If you want something decorative, their Hampton line is reasonable. All are ceramic disk valves unlike Symmons which is still a washer type valve.

Do you need to replace spindle on Symmons Temptrol?

If you loosen the screw somewhat (counter-clockwise), you’ll make the water hotter. Again though, if you loosen the screw as much as it will go, without falling out or leaking, and the water still isn’t hot, you likely need to replace the spindle, even if it’s brand new.

What do you need to remove a Symmons diverter spindle?

Dear BB; The tools required for removal of this spindle would be a 5/16″ allen wrench, a 5/16″ wood screw or lag bolt, and a pair of pliers or vice grips. For specific instructions as to how to safely remove and replace this spindle, please contact our customer service team at 1-800-796-6667, or via email at [email protected] Thanks.

What’s the stem spindle for a Symmons shower valve?

I offer step by step instructions for rebuilding a Symmons shower valve. The part I was waiting for is called a Stem Cartridge Spindle For Symmons TA-10 Temptrol and it looks like this: To be honest with you, I think I could have gotten away with replacing just this one part to stop the leak.

Which is the correct spindle for a Temptrol shower?

Dear KenJ: The spindle shown, our TA-25A, is designed for use in our Temptrol-type tub and shower systems. if you have a shower only system, then the TA-25B would be the appropriate spindle. many thanks. Shane Symmons Web Advisor

Is there a diverter for a shower only valve?

Hi,It sounds like you put a diverter for a shower only valve into a tub/shower valve. They are identical except for being different colors and the diverter holes are a little different. Ask Your Own Plumbing Question Customerreply replied 11 years ago

How to repair a pull up shower diverter?

Repair your shower the easy way 1 Soak your faucet in vinegar to get rid of dirt and hard water residue. 2 Spray the diverter knob with cooking spray to lubricate its sticky bits. 3 Replace the shower diverter gate using a store-bought repair kit. 4 Replace the whole spout with a newer model from the hardware store. More …

Why is my shower diverter gate not working?

A diverter gate – the little knob you twist, turn, or pull to direct your water. Sometimes, the diverter gate gets stuck. When you try to turn it or pull it up, it refuses to budge or makes squeaky, grating noises. If you do manage to pull it up, it may stick at the top and refuse to push back down.

Are there any items to compare to Symmons shower valves?

You have no items to compare. You are truly helpful. I am guessing they are fortunate to have you working for them. Have a great day! Thank you very much. I appreciate all of your help this is exactly what I needed. Have a great week!!!

Where does the water come from when you change the diverter?

The problem now since changing the diverter spindle is that there is very little water flow out of the shower head, most of the water comes out from the tub spout no matter where you set the diverter handle.

Why is my Symmons Temptrol shower spindle not working?

Also, it controls the balance between hot and cold water. Finally, if your shower valve feel very tight when you try to turn it, this is probably the culprit. Replace this one part with only a screwdriver and a pair of channellocks and you’re all set.

How can I Make my Symmons Temptrol water cooler?

Here’s a photo of it. If you turn the water valve to the off position and then turn the set screw in (clockwise) a few turns, you’ll make the hottest water temperature cooler. If you loosen the screw somewhat (counter-clockwise), you’ll make the water hotter.

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: dbXpRb0v5ysAkef4)

The Daily Insight

Why do I have to replace my Symmons shower diverter spindle?