Where does the rubber gasket go on a sink drain?

The Flange of the basket strainer goes on the inside of the sink and the rubber washer/gasket, paper gasket, pressure cup and nut are under the sink. The rubber washer seals the sink from below, putty or caulk seal the flange to the sink from above.

Can I use silicone in place of plumbers putty?

A clay-like substance called plumber’s putty is the most popular choice for sealing sink drains, but you can also use silicone caulk.

Can you use silicone on rubber gasket?

Silicone should not harm a rubber gasket, as many manufacturers are specifying silicone caulking instead of plumbers putty between the shower drain and the shower base. Only a rubber gasket should be needed on the bottom side of the shower between the shower and drain.

How long does it take silicone to dry?

Silicone sealant generally cures within 24 hours. If it has been over 24 hours, check the silicone sealant “Use By” date on the package.

How do you fix a strainer on a kitchen sink?

From beneath the sink, place a rubber gasket and metal or fiber friction ring over the strainer. Secure the gasket and friction ring by screwing on the drain locking ring. Next, make sure the drain compression seal is seated properly in the drain locknut, then reinstall and tighten the drain locknut.

Why do you need a sink basket strainer?

A sink basket strainer is simple enough for anyone to understand. This mesh basket catches solid objects to save them from falling into the sink. Replacing one is usually a quick, simple job, but there are a few pitfalls to be aware of.

Why is my sink strainer leaking under the sink?

Fixing under-the-sink leaks is a project most homeowners can take on. These leaks are typically caused by a bad seal between the sink and the sink strainer. This guide will teach you the best way to fix the problem. Tip: The sink strainer assembly has quite a few nuts, washers and gaskets.

What to do if you break sink Stainer?

Tap on the tabs under the sink to move the ring counterclockwise. You might have to jam a screwdriver into the basket from the top to keep it from spinning. If you break the tabs, its ok, you can go buy a new sink stainer for cheap, and its shiny clean too.

How long do O rings last on Kohler strainer?

The o ring fit a little loose but they have sealed off drain and sink does hold water now. I hope they will stay on. If they stay on everything will be OK. Price a little high for an o ring. Come loose after 2 weeks of use. Right fit for the kohler strainer. This o-ring fit my Kohler strainer basket perfectly.

From beneath the sink, place a rubber gasket and metal or fiber friction ring over the strainer. Secure the gasket and friction ring by screwing on the drain locking ring. Next, make sure the drain compression seal is seated properly in the drain locknut, then reinstall and tighten the drain locknut.

Fixing under-the-sink leaks is a project most homeowners can take on. These leaks are typically caused by a bad seal between the sink and the sink strainer. This guide will teach you the best way to fix the problem. Tip: The sink strainer assembly has quite a few nuts, washers and gaskets.

What do I do if my drain strainer wont work?

Use a basket strainer wrench to remove the big drain locking ring under the strainer. If it won’t budge, loosen it by placing a screwdriver on the lugs and tapping the screwdriver with a hammer. Next, unscrew the locknut and remove the strainer assembly. Use a plastic putty knife to scrape off the old putty on the drain opening.