Milliput products are available from most leading model/hobby shops, art and craft suppliers, independent hardware stores and plumbers merchants.

Where do I find Milliput?

Milliput products are available from most leading model/hobby shops, art and craft suppliers, independent hardware stores and plumbers merchants.

What does Milliput not stick to?

Milliput products are resistant to frost, heat, solvents and most fuels.

How much is Milliput?

Compatible MaterialPorcelain, CeramicColorWhiteBrandMilliput

What can Milliput be used for?

The product can be used for sculpture, making and repairing miniature models, restoring porcelain and other clay pots, plugging holes or rotted areas in engines and boats, plumbing and other applications.

Can Milliput be used on wood?

Milliput can be used to repair or fill wood as well as ceramics, glass, masonry, plastics and metals. It is an epoxy putty, supplied as two compounds you mix together. … Milliput will not shrink as it sets, making it ideal for filling voids in wood. Once fully cured the putty can be sanded, drilled or even painted.

Is Milliput toxic?

Hi mouse, milliput is safe and non toxic.

Is Milliput Food Safe?

Yes it is safe -once cured it is chemically inert and won’t react with food.

What Colours does Milliput come in?

• Standard (Yellow/Grey)
• Terracotta.
• Silver Grey.
• Black.
• Superfine White.
• Turquoise Blue.

How long does it take for Milliput to dry?

Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.

Article first time published on

Can you remove Milliput?

When tools have been used for applying or contouring Milliput they should be cleaned immediately after use with a wet rag or paper. If the putty is allowed to harden on it will be almost impossible to remove.

Can you polish Milliput?

Jane at the Milliput Company sent me some Black Milliput to play with a year or so ago and since Set is sometimes portrayed in Black in Egyptian art it was the perfect medium. It polishes up beautifully and takes a lovely deep shine if you finish it off with beeswax polish.

Is Milliput air dry?

Milliput Epoxy Putty is waterproof and can be used outdoors without any issues. … So this is one of the biggest advantages of using Milliput Epoxy Putty over air-dry clay or other types of clay.

Where is Milliput made?

– Milliput is made in the UK.

Can you thin Milliput?

You can use water to dilute it. Here someone suggest adding a little soap with the water, as this will not only let it mix better, but also increase the drying time, although I think this might be detrimental for the structure.

Is Milliput fish safe?

Tank of the Month Winner Milliput is safe to use within a reef tank, even a small one, but you have to be careful not to overwork it in the tank, the powder released is not toxic but does reduce oxygen in the water, its probably this that has caused you problem.

Is epoxy cancerous?

Tests on laboratory animals showed that older epoxy resins caused skin cancer. It is, most likely, due to epichlorohydrin, which probably causes cancer in humans as well. However, newer epoxy resins contain less epichlorohydrin, so they don’t cause cancer in animals.

Is Milliput waterproof?

It sets hard in three hours and may then be sanded smooth. The paste sticks effectively to almost anything including metals and plastics, is waterproof and very durable. Milliput is inexpensive and available in different grades identified by the different packaging colours.

Which part of Milliput is the hardener?

One part is the hardener, the other part is the resin. So logic dictates: more hardener -> harder finish, faster curing, more brittle. More resin -> slower curing, more ductile finish (‘means it’s less prone to crack when bending).

Can you bake Milliput?

Since cured Milliput is heat-resistant up to 130C successive adding/baking is possible (but see later addition June 2014 below).

How do you use Milliput on terracotta pots?

1. Make sure you scrub the pot to remove grease and dirt.
2. Knead equal amounts of the two sticks for 5 minutes until the colours become uniform. …
3. Moisten the crack and firmly apply the Milliput, pressing with your fingers and thumbs.

Can you sculpt with Milliput?

Unlike green stuff, Milliput can be safely sanded and filed after it hardens. This makes it ideal for sculpting large smooth surfaces, like those seen on body armour or shields. Milliput is remarkably good at holding its shape while you are working with it.

Is resin a Foodsafe?

YES it’s true, cured ArtResin can be safely used as a food contact surface! This means that when used as directed, cured ArtResin will not leach any substances into food that comes into contact with it.

What epoxy is FDA approved?

– EPOXY RESIN FOOD SAFE FDA COMPLIANT VERY CLEAR HIGH IMPACT COATING. MAX CLR is a versatile, tough and resilient epoxy resin that can be used for many other applications such as: Marine and Aircraft Composite Fabrication.

Is epoxy safe after it dries?

Cured: When epoxy resin cures, it is non-toxic. The cured stage of epoxy is the final stage where it is completely solid and hardened. In its final form, epoxy is safe to touch, walk on, and place items on.

What kind of paint do you use on epoxy clay?

You can color the epoxy clay using acrylic paints. need a little bit to create deep opaque colors.

How long does epoxy putty take to dry?

Expect a full cure in about 3 – 5 hours after bonding. After mixing, the product is no ready to be applied with a fresh mixing stick, disposable putty knife or spreading blade.

How do you cure epoxy putty?

Epoxy Putty Paste can be feathered (smoothed out) with a tool or rubbing alcohol prior to cure. Additional layers can be added within 30-40 minutes. Epoxy will cure in 12-16 hours and is able to be sanded and painted. Applying heat will expedite cure, i.e. using a hair dryer or heat gun.

How do you soften epoxy putty?

Use the heat gun at a temperature of about 90 °C, aiming it at small areas of the epoxy until it softens. You can then use a plastic scraper to remove the epoxy. Use chemicals. If you’re removing epoxy from plastic or glass, you can use chemicals to soften the epoxy, and then scrape it away.

What is the strongest air dry clay?

To recap, of the air-dry clays Premier is the strongest, followed by Premix, La Doll, and then Creative Paperclay. Premix is very close to Premier’s strength though, considering the whole range of air-dry clays.

Can you pour resin over clay?

Yes, you can use epoxy resin over baked polymer clay to seal it, strengthen it and give it a gorgeous, glossy, look. To cover polymer clay with ArtResin, paint it on with a disposable foam brush or apply it with gloved hands.