8mm = 5/16 inch. 9mm = almost 3/8 inch. … 15mm = almost 19/32 inch. 16mm = 5/8 inch.

Are M8 and 5/16 the same?

Well, quick answer is no. They are not the same and they are not interchangeable, although they can work under certain circumstances. The most important part is understanding the meaning of M8 and 5/16 to refer to the size of a metric screw or bolt, so then we can see why they aren’t the same thing!

What is the same size as a 5 16?

MMApproximate Size In InchesExact Size In Inches7mmLittle over 1/4 Inch0.27559 Inches8mm5/16 Inch0.31496 Inches9mmJust short of 3/8 Inch0.35433 Inches10mmLittle over 3/8 Inch0.39370 Inches

Will a 5/16 socket fit a 8mm nut?

5/16 is technically a little smaller then 8mm but if it fits over it then it’s a better option. If it’s not coming off that’s another issue.

Is M8 8mm?

The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.

What size is bigger 5/16 or 3 8?

For instance, 5/16 inches and 3/8 inches are two measurements on a ruler. In order to compare the two fractions, they must have a common denominator, 16. 3/8 is larger than 5/16.

What size is a 5/16 screw?

SizeMajor Thread Diameter*DecimalNearest Fractional Measurement#16.268″17/64″#18.294″19/64″#20.320″5/16″

What are standard bolt sizes?

Bolt DiameterStandard Thread Length (in.) *Bolts 6 inches and shorterBolts longer than 6 inches5/8″1-1/2″1-3/4″3/4″1-3/4″2″7/8″2″2-1/4″

What's the next size up from a 5 16?

Bolt DiameterMetricStandard1/8″8mm5/16″3/16″10mm3/8″1/4″11mm7/16″5/16″13mm1/2″

How do you measure a metric nut?

If the nut is metric, count the number of lines on the tape measure to find the measurement. If you count 9 lines, the size is a 9-mm (millimeter) nut. If the nut is US standard, count the smallest lines on the tape measure in sixteenths. Add the sixteenths together to find the size.

Article first time published on

How many mm is 5/16ths of an inch?

Dimensions — Inches to Metric0.313”5/16”7.95 mm0.375”3/8”9.53 mm0.438”7/16”11.13 mm0.500”1/2”12.70 mm

Whats bigger 1/2 inch or 5 8?

In this case, the lowest common denominator is 8. This is what 5/8 and 1/2 look like with the same denominator: … Now that these fractions have been converted to have the same denominator, we can clearly see by looking at the numerators that 5 is NOT less than 4 which also means that 5/8 is NOT less than 1/2.

What is the metric equivalent of 5 16?

SAEMetricInch5/16″0.3138mm0.31511/32″0.3449mm0.354

What size bolt is 8mm?

Shoulder Diameter (A)Thread (C)Head Diameter (E)6mm5mm x 0.810mm8mm6mm x 1.013mm10mm8mm x 1.2516mm12mm10mm x 1.518mm

What size nut fits a 8mm bolt?

SizeSpannerAllen KeyM58 mm4 mmM610 mm5 mmM813 mm6 mmM1017 mm8 mm

What size is a 8mm nut?

Product detailsDiameter:8mmThread pitch:1.25mmWidth across the flats:13mmWidth across the flats Min:12.73mm

What size bolt is a 5/16 head?

US BoltsBolt Diameter (in)Head and Wrench Size (in)5/161/23/89/167/165/8

What size drill bit do I need for a 5/16 screw?

I would go with a 3/8″ hole for a 5/16″ bolt or an 11/32″ hole if you need a tighter tolerance.

What is a #5 screw?

THREAD DIAMETERSizeNearest FractionMillimeter#51/83.1#69/643.3#85/324.2

Is it more or less than?

=When two values are equal we use the “equals” signexample: 2+2 = 4<When one value is smaller than another we use a “less than” signexample: 3 < 5>When one value is bigger than another we use a “greater than” signexample: 9 > 6

What is smaller than 3/16 of an inch?

Fraction Conversion TableFractionDecimalMillimeters5/320.156253.96811/640.1718754.3653/160.18754.762

What is bigger half inch or 3 8?

0.5 is greater than 0.375 which also means that 1/2 is greater than 3/8.

Is 3/8 and 10mm the same?

It’s the same size. 3/8 is in inch and and its 10mm.

What piercing is smaller than 5 16?

MetricInches(fraction)Inches(decimal)4.5 mm3/16″0.186.0 mm7/32″0.247.0 mm9/32″0.288.0 mm5/16″0.31

Is 14mm the same as 9 16?

13mm = just over 1/2 inch. 14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch.

What does 8.8 mean on a bolt?

So, in English, a PC 8.8 bolt is a bolt with a nominal tensile strength of 800 MPa and a nominal yield strength that is 80% of the bolt’s nominal tensile strength, or 640 MPa.

What size is M8 in inches?

MetricClosest InchM8-1.255/16-18 (Smaller)M10-1.53/8-16 (Smaller)M12-1.751/2-13 (Larger)M14-2.09/16-12 (Larger)

How can you tell if a bolt is metric or standard?

Telling the difference between a metric and imperial bolt is easy. If the bolt has lines on the head its standard or imperial. If the bolt has numbers on the head then its metric.

What size is a 10mm nut?

Product detailsDiameter:10mmThread pitch:1.5mmWidth across the flats:17mmWidth across the flats Min:16.73mm

What size is M24 nut?

M24 (24mm) Thread Size. 19mm Nut Thickness (T)

What size is M7 nut?

DiameterPitchDepth of NutM71.0mm5.5mmM81.25mm6.5mmM101.5mm8mmM121.75mm10mm