What to do if your Fisher and Paykel washer is not draining?

Drain hose too low. Ensure the height of the drain hose is at least 800mm from the floor level (refer to ‘ Installation instructions ‘). Drain hose sitting in water. Clear the drain. Washer is not draining. Drain hose blocked. Clear the drain hose. Pump filter blocked. Clear the pump filter (refer to ‘ Caring for your washer ‘).

What to do when water wont drain at end of cycle?

Check to see all of your filters are clear. There are float switches or sensors under the water that can get stuck down when they are dirty. After you reset the unit and the water has pumped out, go in with a screwdriver and remove all the covers and screens. Clean everything. If you have sensors or floats, clean them out too.

What should I do if my washer is not draining?

Drain hose sitting in water. Clear the drain. Washer is not draining. Drain hose blocked. Clear the drain hose. Pump filter blocked. Clear the pump filter (refer to ‘ Caring for your washer ‘). Drain hose higher than 1200 mm above floor level. Lower the level of the drain hose (refer to ‘ Installation instructions ‘). Filling continuously.

Why does the Maytag dishwasher drain at the end of the cycle?

Most Maytag Dishwashers have a 4 second refill of fresh water at the cycle complete to keep the pump wet (seals). This may be heard with the solenoid energizing and the water flowing at the cycle end when running a rinse only cycle.

Drain hose too low. Ensure the height of the drain hose is at least 800mm from the floor level (refer to ‘ Installation instructions ‘). Drain hose sitting in water. Clear the drain. Washer is not draining. Drain hose blocked. Clear the drain hose. Pump filter blocked. Clear the pump filter (refer to ‘ Caring for your washer ‘).

Check to see all of your filters are clear. There are float switches or sensors under the water that can get stuck down when they are dirty. After you reset the unit and the water has pumped out, go in with a screwdriver and remove all the covers and screens. Clean everything. If you have sensors or floats, clean them out too.

Can you use a laptop with water damage?

At first, your laptop will probably work as expected – and this leads many into believing that it doesn’t require any attention. As such, you need to resist this temptation and pack everything away as a matter of urgency. Water damage can take a while to show and by continuing to use your laptop, you will be worsening the problem significantly.

Drain hose sitting in water. Clear the drain. Washer is not draining. Drain hose blocked. Clear the drain hose. Pump filter blocked. Clear the pump filter (refer to ‘ Caring for your washer ‘). Drain hose higher than 1200 mm above floor level. Lower the level of the drain hose (refer to ‘ Installation instructions ‘). Filling continuously.