What to do if your faucet is clogged after plumbing work?

An aerator can clog slowly as mineral deposits build up, or quickly after plumbing work loosens debris inside pipes. Usually, a quick cleaning solves the problem. Remove the aerator (Photo 1) and disassemble it.

What does rust mean on a galvanized drain pipe?

The most common area for rust on a galvanized water pipe is in the threads, where the pipe is at its thinnest. When rust appears on the threads of galvanized pipe, it means that the pipe wall has worn through and the pipe will need to be replaced. If possible, replace the entire galvanized water line. Can a Rusty Galvanized Drain Pipe Be Fixed?

Is it normal to have low water pressure in a new faucet?

Low water pressure in a new faucet often dampens your satisfaction after you complete this project. If this happens to you, check several things first before you uninstall and return the faucet. Before you check anything else, be sure your faucet is not a low flow, water saver faucet.

What should I do if my faucet neck is clogged?

Gunk can also build up inside the faucet neck, so ream it out with your finger and flush out the loosened debris. If the mineral buildup resists scrubbing and you have a standard cylinder-shaped aerator, you can replace it. Take your old aerator along to the home center or hardware store to find a match.

What to do if your faucet sprayer is clogged?

Unscrew this cap with your hands and look inside to see if there are any deposits of dirt or calcium. Sometimes, all you need to do is to insert a needle inside the holes in order for the water to flow properly. The most likely causes of a clogged faucet is the presence of calcium, lime and rust.

What should I do if my Moen faucet is blocked?

Rinse the aerator thoroughly with hot water. Wrap the threads with Teflon tape to help seal the connection. Reinstall the aerator by turning it clockwise onto the end of the faucet spout by hand to ensure it does not become cross-threaded.

Where is the screen on a Moen kitchen faucet?

Moen is a manufacturer of many styles of kitchen and bath faucets. All the Moen models have a screen that is installed at the end of the faucet spout. This screen is called an aerator. The function of an aerator is to direct the stream of water down into the sink.

Why does my faucet head keep clogging up?

The most likely causes of a clogged faucet is the presence of calcium, lime and rust. These substances can accumulate over years of use, and they can eventually clog your faucet head.