What should I do if I need to replace my toilet?

If the bolts that hold down the toilet are still in good condition, you can reuse them. If they are rusty, consider replacing them. The toilet goes back on basically the way it came off. Place the new wax ring over the drain hole in the floor with the rounded side up.

How do you remove a toilet from the floor?

Now we need to remove the toilet from the floor. Remove the caps that sit over the bolts at the bottom of the toilet bowl. Then, using an adjustable wrench, unscrew the nuts. Loosen the bowl by rocking it to break its seal with the floor and toilet flange. Once it’s loose, pull the entire toilet up until it clears the bolts on the floor.

Do you need a helper to remove a toilet?

If you need to replace an old toilet, repair a toilet flange or install new bathroom flooring, you’ll need to know how to remove a toilet. Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper. This guide will give you step-by-step instructions on how to remove a toilet.

How to remove a toilet tank at Home Depot?

1 The tank is held onto the bowl with mounting bolts. There will be two or three mounting bolts: one on each side of the tank and sometimes one in the 2 Use a ratchet wrench or a basin wrench to remove the nuts from the mounting bolts. 3 Lift the tank carefully off the bowl. Place it on a towel where it won’t be in the way.

How do you remove a two piece toilet?

Disconnect the toilet connector tube at the shutoff valve. Have a bucket or towel nearby to collect any standing water that may drain from the line. Disconnect the toilet connector tube at the toilet tank. If you have a two-piece toilet, separate and remove the toilet tank.

If you need to replace an old toilet, repair a toilet flange or install new bathroom flooring, you’ll need to know how to remove a toilet. Removing a toilet is a relatively simple project that most DIYers can tackle either alone or with a helper. This guide will give you step-by-step instructions on how to remove a toilet.

Where does the water go when you remove a toilet?

Some water will remain in the bottom of the bowl; bail it out with a cup or sop it up with a large sponge. Be thorough: Any water that remains will usually end up on the floor when you remove the toilet.

How do you replace a leaking toilet at Home Depot?

When replacing a leaking toilet, first turn off the shutoff valve on the water supply line. Flush the toilet to empty the tank and bowl and sponge dry the excess water from both. Disconnect the water supply tube at the shutoff valve and at the toilet tank.