What kind of retaining ring do I Need?

Another type of retaining ring is self-locking. This retaining ring works well in applications that require very little thrust to retain the assembly. Self-locking rings don’t need a groove and are ideal for shaft or housing diameters of 1 in. or less.

How are stamped rings used to replace cotter pins?

Stamped rings are installed with the help of a special tool — snap ring pliers. The pliers are inserted into the lugs to separate or compress the ends so the retaining ring can clear the shaft or bore. Stamped rings can replace cotter pins and other traditional fasteners in an array of applications.

Which is better retaining rings or axial rings?

They also don’t extend as far around the circumference of the groove as their axial counterpart. Because of the gap portion, they accept less thrust loads to the groove wall. After selecting the type and installation style, the third consideration is ring size, which is determined by the diameter of the housing or shaft.

How are retaining rings installed in a shaft?

The second factor in ring selection is deciding whether to use an axially assembled ring or a radially assembled ring. An axial retaining ring is installed into a groove in a shaft or bore along an axis centerpoint. Axial rings have lugs and lug holes that are used for installation. Once installed, they contact virtually the entire groove.

How are stamped rings used for retaining rings?

Stamped rings are installed with the help of a special tool — snap ring pliers. The pliers are inserted into the lugs to separate or compress the ends so the retaining ring can clear the shaft or bore. Stamped rings can replace cotter pins and other traditional fasteners in an array of applications. Another version of stamped rings are e-clips.

Stamped rings are installed with the help of a special tool — snap ring pliers. The pliers are inserted into the lugs to separate or compress the ends so the retaining ring can clear the shaft or bore. Stamped rings can replace cotter pins and other traditional fasteners in an array of applications.

How are pliers inserted in a retaining ring?

The pliers are inserted into the lugs to separate or compress the ends so the retaining ring can clear the shaft or bore. Stamped rings can replace cotter pins and other traditional fasteners in an array of applications.

Why do you need a retaining ring in a joiner?

As with other joining hardware (such as cotter pins, screws, and bolts) retaining rings prevent mating components from excessive moving. In short, they create a removable shoulder preventing components from migrating out of proper position during operation.