What is the difference between standard and comfort height toilets?

The difference between standard height and comfort height toilets is approximately two inches. It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet. There are a few drawbacks to this raised toilet.

How do I know if my toilet is standard or elongated?

To determine if your toilet is round front or elongated, measure the distance between the center of the bolt holes(A) (which connect the seat to the bowl) out to the front rim of the toilet(B). If it measures approximately 16 1/2″ your toilet is a round front.

What toilet has the highest GPF?

The Strongest Flushing Toilet

• American Standard Cadet Pressure Assisted Toilet – the pressure assist makes this a fast flush toilet and ensures strong performance.
• TOTO Ultramax Toilet – a siphon flushing action makes this the one with the strongest toilet flush.

What is the GPF of a Kohler toilet?

The two Kohler Wellworth toilets that we have discussed above have some of the most amazing features and are a joy to add to any bathroom. The final choice comes down to whether you want a Kohler toilet that uses 1.28 GPF or 1.6 GPF. Otherwise, you will get value for your money with whatever toilet you choose.

Which is better 1.28 gpf or 1.6 gpf toilet?

The answer is 2336 gallons. A single family can save 2336 gallons yearly by choosing to install a 1.28 GPF toilet over a 1.6 GPF toilet. Billions of gallons can therefore be saved if all houses in America installed the water efficient 1.28 GPF toilets.

What are the disadvantages of a Kohler toilet?

One disadvantage with one-piece toilets like the Kohler Santa Rosa is that if one piece (the tank or the bowl) breaks, you will need to replace the entire toilet. With a two-piece toilet you will only have to replace the broken piece. I have written a detailed blog post on the pros and cons of one-piece vs two-piece toilets.

When did 1.6 gpf toilets become industry standard?

Since 1992, the Energy Policy Act was implemented as a means of water conservation. It was regulated that toilets sold in the United States after January 1994 use no more than 1.6 gallons per flush. With that maximum in place, low flush toilets of 1.6 GPF became an industry standard.

What’s the difference between 1.28 gpf and 1.6 gpf toilets?

In 1995, the National Energy Policy Act started requiring plumbing manufacturers to make and homeowners who were remodeling their homes to purchase toilets that utilized 1.6 gallons of water per flush or less. If you’re undecided about which toilet to choose between the 1.28 GPF and 1.6 GPF toilets,…

One disadvantage with one-piece toilets like the Kohler Santa Rosa is that if one piece (the tank or the bowl) breaks, you will need to replace the entire toilet. With a two-piece toilet you will only have to replace the broken piece. I have written a detailed blog post on the pros and cons of one-piece vs two-piece toilets.

Where do I find the GPF on my toilet?

GPF tells you how much water is consumed by your toilet every time you flush. This information is usually stamped behind the seat hinge of the toilet bowl. If this is not the case, lift up the lid of your toilet tank and look for the manufacturer’s date stamp.

Why do Older toilets have a higher GPF?

Older toilets generally have a higher GPF compared to modern toilets, making them more wasteful and not very environmentally friendly. Saving water is crucial, but what it also comes down to is money. If a toilet is using too many GPF, it is wasting a lot of money, quite literally flushing dollars down the drain.