Reverse Board & Batten siding features an extra thick panel that is reinforced with a foam backer to create the rigidity and durability of hardboard cladding. It is lighter, easier to handle, and more weather-resistant than real wood, fiber cement, and wood composite siding.

How is reverse board and batten siding attached?

Unlike conventional board-and-batten siding—where boards are fastened directly to the wall, and battens are nailed over the gap between the boards—with this technique, the narrow battens are applied first, and the wide boards are nailed on second.

Is board and batten vertical or horizontal?

Wood siding that consists of narrow vertical strips (battens) installed over a flat base (board) is known, logically enough, as board and batten.

What does board batten mean?

Board and batten is a siding and paneling style that uses narrow strips of wood placed over the joints of wide boards for a geometric, layered effect. Historically and traditionally, a wooden batten would be placed over a seam between the wide boards, creating a stronger and more energy-efficient siding.

What is vertical board and batten?

Board and batten is a siding or paneling style that pairs vertical planks of wood (the boards) with smaller strips of wood (the batten). It was a popular siding choice for barns and farmhouses but is now seeing its time in the spotlight. The beauty, authenticity, and warmth of wood siding with a modern touch.

Can Plywood be used for board and batten?

Board-and-batten can be installed onto solid plywood or OSB sheathing. If your sheathing is not solid, you will need to first attach horizontal furring strips.

What is batten board siding?

So, what is “board and batten?” It’s a type of siding where thin strips of wood molding—or “battens”—are placed over the seams of panel boards. The result is an aesthetic that is both rustic and chic, with the strong vertical lines providing shadows and textures to the home exterior.

Why do board and batten?

As an exterior cladding, board and batten manages to impart a rustic, handmade quality even to new homes built in unmistakably contemporary styles. Within the home, board and batten commonly appears in mudrooms and hallways, bedrooms and dining areas, adding charm to otherwise bland expanses of drywall or plaster.

What are battens used for?

A batten is generally a strip of timber (although it can also be steel or plastic) which is used in the construction of buildings. They are typically used as spacers to raise the surface of a material, or as a secondary framework onto which a surface may be fixed.

Is board and batten good?

Is board and batten siding good? Of course, it is! Board and batten siding has been increasing in popularity over recent years because it’s not only beautiful and unique-looking, but it’s also highly durable and versatile. If it’s maintained properly, this style of siding can last for decades.

Article first time published on

What is the difference between shiplap and board and batten?

Shiplap and Board and Batten are two different wooden wall treatments. Shiplap refers to wooden boards of the same width with grooves that help each board fit together tightly, while board and batten refers to boards of different widths installed with space between, usually vertically.

What type of wood is used for interior board and batten?

Cedar is a good lumber choice because it is soft; harder wood, such as pressure-treated pine, will not seal as well and is more likely to crack. Board and batten is commonly used in farmhouse style homes, but it also looks well with minimalist, modern, and transitional styles.

How thick should battens be?

Batten Sizes A true batten is 2-inches in width or smaller, but you can use larger widths by installing trim in place of a batten if you want a thicker appearance. They’re installed directly over the vertical panels to get the traditional look.

What era is board and batten from?

BOARD AND BATTEN was popular as a wooden siding for houses in America between 1845 and about 865.

What is the difference between wainscoting and board and batten?

Wainscoting is a protective barrier applied to the lower half or lower third of a room, usually on all the walls. Board and batten refers to a specific design that can be used to create this protective barrier.

How high should board and batten be?

It should generally measure either one-third or two-thirds the height of the ceiling. But it should never settle at half the height of a room. Using board and batten can completely alter the face of a home or the style of a room because it adds detail onto an otherwise flat surface.

Do you have to paint board and batten siding?

Old barns and houses that still have the original siding on them in good condition still exist. Low maintenance. Except for certain types of wood, board and batten siding is low maintenance. You won’t have to paint, stain, or seal it constantly.

What is exterior board and batten made of?

Board and batten siding is traditionally made out of wood, and is most often used by homeowners wanting a more rustic look for their homes. Unfortunately, over time, wood has a tendency to warp, rot, and require a lot of maintenance to keep its appearance.

Is vertical siding more expensive?

When considering the cost of installation, vertical siding is more expensive and time-consuming to install than horizontal siding because furring strips are placed underneath first to ensure that the siding is aligned properly and smoothly.

What is exterior grade plywood?

Exterior means the panels have been waterproofed and can withstand inclement weather. Use exterior rated plywood for permanent outdoor structures that will be exposed to water long-term. Exposure 1 means the panels have been waterproofed and can withstand exposure to the elements during construction.

What do you mean by batten?

A batten is a long strip of wood that is fixed to something to strengthen it or to hold it firm. … If something is battened in place, it is made secure by having battens fixed across it or being closed firmly.

What is the difference between purlins and battens?

But a “purlin” is applied directly onto the roof rafters, running perpendicular between them, while a “batten” is nailed to roof sheathing or applied over an existing roof for installation of a new roof.

What are battens in building?

A Batten is a small section of timber or steel which provides a means of supporting, positioning or fixing roof cladding and ceiling sheets. Tile batten – a batten parallel to the eaves line and at right angles to the rafters to which tiles are fixed.

What style is board and batten considered?

Board and batten is a type of wainscoting, that has grown in popularity recently with the farmhouse decor and cottage trends. I love it, because it instantly adds character to any room, without looking too fussy.

How do you remove board and batten?

1. Step 1: Score Your Trim. Your first step is to break the seal between your wall and the wainscoting. …
2. Step 2: Gently Pry Away Your Trim. …
3. Step 3: Scrape Away Lingering Caulk. …
4. Step 4: Patch Your Walls. …
5. Step 5: Sand and Repeat. …
6. Step 6: Paint Your Walls and Rejoice!

Can board and batten look modern?

While an old technique, board and batten siding has a modern feel, especially in the context of the last 40-50 years. Many new-build neighborhoods have featured either brick or lap siding homes. Therefore, board and batten siding is gaining popularity as a trendy, modern exterior design option.

How far apart are battens?

Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that’s just a personal preference.

What kind of paint do you use on board and batten?

Caulk – Caulk around all the boards to fill in the gaps. Paint – We used Sherwin Williams PURE WHITE 7005 to paint the boards and battens (either eggshell or satin finish—can’t remember now!) You can paint everything the same color, or paint the boards a contrasting shade.

Can you have board and batten and shiplap?

And anything shiplap can do, board and batten can do, too. (Better is subjective.) Like shiplap and other siding styles—think beadboard and tongue-and-groove—board and batten is a relatively simple wood construction that can be added to any preexisting wall (good news for remodelers and renovators).

What are boarded walls called?

Wainscoting vs. Beadboard. Wainscoting is a broader term referring to decorative paneling used for centuries as: a) a wall accent; b) insulation and; c) to prevent (and cover up) damage to walls. It typically is made of wood, and covers the lower three or four feet of an interior wall.

Is shiplap more expensive than beadboard?

Although, beadboard is more versatile, they are more expensive and labor intensive and time consuming, when it comes to installation. Shiplap boards are fairly easy to install as the planks simply interlock with their adjacent planks.