What do you need to know about Rinnai Water controllers?

Total home comfort at the touch of a button – the Rinnai range of controllers are flexible and simple to use allowing you to keep in control of your Gas Ducted heater, Evaporative cooling or Add-On Ice. To make the most of your Rinnai Continuous Flow hot water experience, we suggest installing of at least one of our Rinnai water controllers.

How to clear an error code on a Rinnai split unit?

After unplugging the AC unit, wait for a few minutes before plugging the unit back into power. After a few minutes, plug the unit back in and turn on power. This “Error Code Reset Procedure”may help to reset the control board (computer)and clear the error code or flashing lights from your Rinnai Split System AC Unit.

How to troubleshoot a Rinnai tankless water heater?

Remove the vent system from the top of the water heater. Fire the product and see if the unit will operate without the vent system connected. If the unit operates without coding out at that point that’s a great indication the problem is in the vent system leaving the unit.

What kind of warranty does a Rinnai boiler have?

A single cookie will be used in your browser to remember your preference not to be tracked. Select a region. Commercial-grade units with the industry’s best warranty. Rinnai’s super high-efficiency models offer sleek design, maximum output and an array of features ideal for the hot water demands of large homes.

How does the Rinnai Water heater control module work?

Rinnai’s proprietary control•r™ Wi-Fi Module for tankless water heaters connects to your home’s Wi-Fi so you can monitor alerts, manage schedules, easily register your unit, and more. Adjust the temperature for your water heating system with one tap or voice command.

What do you need to know about the Rinnai pro?

Enable a Rinnai PRO to remotely monitor and manage system performance and provide faster service. Easily register your device through the app to maximize your labor coverage. Ensure hot water is ready when it’s needed with customizable daily schedules. Vacation mode ensures money and energy aren’t wasted on heating water that won’t be used.

What does error code 14 on Rinnai Water Heater mean?

Over-temperature sensor reacts if the unit is too hot, so it shuts the unit down. Make sure that problems such as those found when dealing with the error code 14 are resolved. Make sure that the electrical grounding is done correctly and there are no shorts.

How does the motion sensor on Rinnai work?

Mounted near the point of use, the motion sensor operates the recirculation system by detecting full-body movement up to 30 feet away. The sensor turns off the recirculation and is available for purchase if required by local building codes. Just tell your favorite smart home technology to get ready for your shower or bath or even morning routine.

How to reset the Rinnai hot water heater?

Resetting the Rinnai water heater will reinstall the unit to the factory default presets and deleted all the current settings. Turn off all the hot water faucets. Press the On/Off button twice. Turn the hot water back on.

Why does my Rinnai Water Heater have code 10?

Remove burner and inspect copper fins in heat exchanger for a build up between fins.  This will cause air flow restrictions which can lead to code 10’s.  If build up is present, you will need an air compressor capable of delivering 120 psi of air to blow out the burner and heat exchanger fins.

How to troubleshoot a Rinnai tankless air unit?

Turn off gas valve feeding the appliance.  Unplug igniter wire; hold the igniter wire with an insulated pair of pliers about a 1/4″ from a piece of metal.  Cycle the unit to ensure you see a spark when unit is cycling.

How to check power supply on Rinnai hairdryer?

Checkpower supply (Plug another appliance (ie hairdryer) into power point and test. If a controller is fitted check that it is on also) Check gas supply (Turn gas stove top on then turn hot water tap on.

Is there a problem with the Rinnai Water controller?

Controller is black and when water to the unit is on there is a tapping noise. Is the problem with the controller or the unit it self? Thanks for the question, we would recommend contacting our Technical Department to discuss this matter further. They can be reached on 1300 555 545 (option 3) or alternatively by emailing [email protected]

How do you turn on a Rinnai Water Heater?

How to operate a Rinnai water heater Turn the gas valve clockwise to the ‘On’ position. Switch on power to the water heater by pressing the power button. Set your desired water temperature on the thermostat using the ‘Hot water temp’ up and down buttons.

How does the Rinnai hydronic air handler system work?

Rinnai Vent-Free Convectors push heat to the farthest reaches of the room, evenly warming larger spaces and maximizing cost-savings. The Rinnai Hydronic Air Handler System easily integrates with select tankless water heaters or boilers to deliver energy-efficient warmth.

How is the Infinity 26 hot water system rated?

Customise and complete your Infinity 26 system with our comprehensive range of hot water controllers to enhance your experience Compatible with low flow rated shower fixtures (3 Star – 7.0 to 9.0 l/min) * Independently calculated using Australian Standard AS5263.1.2.

Which is the most energy efficient Rinnai Water Heater?

Enjoy superior comfort with reduced running costs, as no energy is consumed by the unit until you turn a tap on. With an impressive 6 star energy rating, the Rinnai 26 the most energy efficient 26L continuous flow hot water system on the market.

How many stars does a Rinnai hot water system have?

S5263.1.2 limits the rating shown on the energy label to 6.0 Stars. Where the calculated rating of Rinnai appliances exceeds 6.0 Stars it is designated as an “equivalent” rating.

Do you need controller for Rinnai hot water?

To make the most of your Rinnai Continuous Flow hot water experience, we suggest installing of at least one of our Rinnai water controllers. Controllers enable you to simply set your desired hot water temperature, turn on the hot tap and enjoy, no more mixing hot and cold!

Why is my Rinnai Infinity 26 not hot enough?

The thing with instant units is that they need to lift the water temperature as its flowing through the unit. In winter the starting water temperature is lower and the desired output temperature is typically higher. i.e. lower performance but this shouldn’t really be an issue for the Infinity 26.

Customise and complete your Infinity 26 system with our comprehensive range of hot water controllers to enhance your experience Compatible with low flow rated shower fixtures (3 Star – 7.0 to 9.0 l/min) * Independently calculated using Australian Standard AS5263.1.2.

What makes a Rinnai gas heater so efficient?

The Rinnai efficiency has an additional heat exchanger. The second heat exchanger enables the efficiency range to extract even more heat from the gas, meaning less energy is required to meet your hot water requirements.