Metal bits are also known as high-speed steel (HSS) or twist bits. They are usually black but sometimes gold in colour (gold ones are usually specially coated for extra durability). Metal-drilling bits can be used for drilling plastic and wood, but you should never use wood bits to drill metal.

What Colour are drill bits for drilling metal?

Conventional HSS step bits are black, but the ones best for drilling metal are gold, because they are coated with titanium nitride for reduced friction and longer wear.

How can you tell the difference between a masonry drill bit and a metal drill bit?

• Wood Drill Bits: These can be identified by a small, pointed tip at the very end. If you look closely, you can see spurs on each side. …
• Masonry Drill Bits: These bits have a gently sloping tip. …
• Metal Drill Bits: These have a wide-angled point at the end, and they may also be painted black.

What do the Colours of drill bits mean?

Masonry drill bits normally silver have a wide head on. Gold bits are normally pointed and are for drilling wood etc. Black bits are also pointed headed but for drilling metals.

Are black or gold drill bits for metal?

Black oxide bits have 50% longer life than standard high speed steel bits. Click here to see available sizes. Gold Oxide – Offers added speed and durability for general purpose drilling applications in wood, metal and plastic and drills 3x faster with speed helix.

What are black drill bits used for?

Black Oxide drill bits are most versatile when it comes to drilling material. Black oxide can be used to work on wood such as oak, maple, pine, metals like steel, copper, aluminum, brass, etc., as well as plastic. Titanium bits are used for drilling through iron, steel, magnesium, aluminum, and wood.

What colour are Bosch metal drill bits?

Twist drill bit ground from solid metal with high surface quality due to titanium-nitride coating. Shank equal to drill bit diameter, drill bit colour: golden.

What are the silver drill bits for?

Silver and Deming drill bit can be used for limited drilling in light gauge steel. This use requires slow speeds, high quality cutting oil, and a smaller diameter of pilot hole. Drilling through aluminium, magnesium and other soft metals do not require less torque as steel.

What are brass Coloured drill bits for?

HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic.

Can wood drill bits be used on metal?

It does matter – wood drill bits won’t work on metal (destroying the bit in the process, unless used on thin and soft metals) and metal drill bits will increase splintering and tear-out when used on wood (but this depends also on the wood type and the diameter of the bit, and for smaller diameters there is little …

Article first time published on

How can you tell if a drill bit is for concrete?

Basic Design of Masonry Bits Masonry bits resemble wood bits at a casual glance because they’ll also have a deep spiral groove to help channel debris from the hole as you drill. The main visual difference is that masonry bits don’t have the blunt, gently rounded tip you’ll see on standard general-purpose bits.

How can you tell if a drill bit is masonry?

Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it. You can use them on brickwork, stone, breeze blocks, and other hard stone surfaces.

What are the Gold drill bits for?

For drilling into metal Metal bits are also known as high-speed steel (HSS) or twist bits. They are usually black but sometimes gold in colour (gold ones are usually specially coated for extra durability). Metal-drilling bits can be used for drilling plastic and wood, but you should never use wood bits to drill metal.

What are black and gold drill bits made of?

The Black & Gold metal drill bits are made of heavy-duty High Speed Steel for drilling into a variety of materials including plastic, wood, and metal. Each bit features a 135° split point tip design to help reduce walking.

Are titanium drill bits for metal?

Titanium bits are suitable for drilling iron, steel, aluminum, magnesium, and wood. Titanium bits are great for general purpose drilling in a production environment because they drill quickly.

How do you match a drill bit to an anchor?

To get the right-size hole, measure the shank of the drill bit against the front of the anchor — its diameter should be the same size or 1/16 inch more than that to make the opening for the screw. If the diameter of the anchor is displayed on the packaging, drill the hole with a bit of the same diameter.

How do you match a drill bit to a plug?

Choose a drill bit that corresponds to the necessary pilot hole size for the wall plug you intend to use. In other words, use a 5.0 mm drill bit for a yellow plug, a 6.0 mm drill bit for a red plug, a 7.0 mm drill bit for a brown plug, or a 10.0 mm drill bit for a blue plug.

What drill bit is best for metal?

Regular drill bits can’t cut through steel, so you need a heavy-duty, hard drill bit to do the job. There are two types of drill bits that you can count on for metalworking projects: titanium and cobalt. Titanium drill bits are high-speed steel drill bits (HSS) that have a titanium oxide coating.

Can I use masonry drill bit on metal?

The masonry bits work a heck of a lot better and don’t dance around as much on smooth steel. The only catch to using masonry bits on metal is that, since the tip is eccentric, it will drill a hole twice the diameter of the bit size. So for example, to drill a 1/2 inch hole, I’d use a 1/4 inch bit.

Can I use black oxide drill through metal?

Black oxide-coated HSS drill bits have a finish designed to help resist corrosion and increase durability. … They work for drilling wood, metal, fiberglass and PVC. Carbide-tipped drill bits stay sharp much longer than steel, HSS or titanium bits. They’re effective for drilling tile and masonry.

What are the 5 types of drill bits?

• Twist Drill Bits. Also known as high-speed bits, they resemble corkscrews and are some of the most popular bits. …
• Brad Point Drill Bits. …
• Masonry Drill Bits. …
• Rivet Drill Bits. …
• Spade Drill Bits. …
• Installer Bits. …
• Step Bits. …
• Auger Bits.

What does S & D mean for drill bit?

Milwaukee® S&D Black Oxide drill bits are designed for extreme durability and long life. … A specially designed parabolic flute form clears chips fast, while the 3-Flat Secure-Grip™ shank holds the bit firmly in the drill chuck.

Can you drill through metal with a hand drill?

Cobalt drill bits are the best drill bits for hard metals including stainless steel. If you are using a hand drill then a 5% (M35) drill bit will be most suitable and it will be less brittle than other drill bits. TTP HARD drill bits are 5% cobalt and are a high quality drill bit.

How can you tell if a drill bit is sharp?

Here is the best and only way to determine if a small diameter twist drill is sharp. Hold the twist drill between your fingers and rotate it against a finger nail with a moderate amount of pressure. A sharp drill will cut into the nail. Try it with a few new twist drills and you will see how a sharp drill behaves.

What kind of drill Do I need to drill into concrete?

The preferred tool for drilling into concrete is a hammer drill.

What kind of drill do you need to drill into brick?

A hammer drill is ideal for brick and mortar projects — especially those that require bigger cuts. The tool bores holes by using hammer-like movements. Hammer drills are specific for piercing holes in brick and mortar as well as concrete and cinder block.

Can you use any drill bits with any drill?

Do all drill bits fit in all drills? No, not all drill bits fit in all drills. … ½” sized drills will accept up to ½” drill bit shafts as well as and 3/8” sized bits. Regular drill bits without a hex shanked bit holder cannot be used in an impact driver, however, hex shanked bits can be used in regular drill drivers.

Which drill bits are for masonry?

Drill bits with a tungsten carbide tip are the strongest; when it comes to solid concrete, the sharper the better. Masonry bits cut holes through concrete in two steps. The tip of the drill bit is larger in diameter than the shaft below so that when the shaft reaches the hole, it fits right in.

Why won't my drill go through brick?

Your one word answer is Hardness. Stone is harder than steel which is why it cannot really be drilled without diamond or carbide impregnated bits. Machine tools like drill bits are sharpened by grinding stones not the other way around. Now brick and other masonry are brittle so they can chip or crack easily.

Is there a drill bit for concrete and steel?

The New PENETRATOR Series Drill Bits and now Saw Blades are for drilling concrete masonry and rebar or steel decking with one drill bit or blade!

What is strongest drill bit?

Carbide (Carb) is the hardest and most brittle of the drill bit materials. It’s used mostly for production drilling where a high-quality tool holder and equipment is used. It should not be used in hand drills or even drill presses. These drill bits are designed for the most demanding and hardest materials.