What does maintenance required mean on a 2004 Honda Civic?

Owner’s Manual pages 67-68) The maintenance required light in our dash is a reminder to bring the car in for scheduled maintenance (every 10,000 miles). The light will flash after start up for 10 seconds once you are 2000 miles from the car’s scheduled maintenance.

How do you turn off the maintenance required light on a 2004 Honda Civic?

2004 HONDA Civic Maintenance Light Reset Instructions Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting). Hold the button for at least 10 seconds, until the indicator resets. Categories. Automotive (448) Archives.

What does Honda maintenance light mean?

The Maintenance Required light on your vehicle comes on after a specific mileage has been driven once the light has been reset. When this happens you will need to follow your owners manual and see what service is due for the mileage of the vehicle.

How do I turn off the maintenance required light on my Honda Civic?

Resetting Your Honda Oil Maintenance Light in 4 Steps Turn the ignition to run (one click before starting the engine). Press the Select/Reset button located on either your steering wheel or as a knob on your dash. Press and hold the Select/Reset button for 10 seconds.

Why is the maintenance required light on?

The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.

What does it mean when the maintenance required light flashes on a Honda Civic?

It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. The maintenance required light may being flashing 500 miles before your car is due for service.

What oil does a 2004 Honda Civic take?

All engines available for the 2004 Civic use the same viscosity 5W20 synthetic oil.

How do you reset the maintenance required light on a 2004 Honda Accord?

To reset your 2004 honda accord’s maintenance light, turn the key to the “on” position in the ignition and then turn it off. Depress the odometer trip -b? Button, and hold it down while you turn the key to the “on” position again. The light should go off.

What is the maintenance required light?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.

What does oil life on Honda Civic mean?

You’ll see “Oil Life” with a percentage number on your dashboard. This is your Oil Life indicator, a convenient and important part of your Honda’s maintenance reminder system. So at 40%, your oil still has 40% of its lifetime remaining to do its job before it needs to be replaced.

How often should oil be changed?

On average, vehicles are estimated to need an oil change every 3,000 miles or every six months. This can vary based on your driving habits, your driving frequency, the age of your vehicle, and the quality of the oil you use. If you drive a newer vehicle, you might be able to safely wait a little longer between changes.

Can I drive with maintenance required light on?

Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.

How do I turn off maintenance required light?

The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

How do I turn off the maintenance required light on my Honda?

To reset the maintenance required indicator, turn the ignition switch to the LOCK position, then press and hold the trip meter reset button until the indicator resets.

Is maintenance required light bad?

Once your car reaches the 5,000-mile mark interval or more, the light stays on as long as the vehicle is running – this should be treated as a final warning. While the maintenance required light doesn’t necessarily mean there’s something wrong with the car, you should still take it seriously if it pops up.

Is the maintenance required light the same as check engine?

Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care. It is not an indicator of trouble like the check engine light is.

What happens if you dont change your oil?

Go long enough without an oil change, and it could eventually cost you your car. Once motor oil becomes sludge, it no longer draws heat from the engine. The engine might overheat and either blow a gasket or seize up. If the heat doesn’t cause a gasket to blow, it will warp the parts in your engine.

What does maintenance required mean on Honda CRV?

The maintenance light in Your Honda CR-V is an important signal that lets You know when Your vehicle is due for a service. This can be as simple as an oil change to one of the more intensive higher mileage services.

How much oil does a 2004 Honda Civic hold?

2004 Honda Civic Sedan Specifications 2004 CIVIC SEDAN DX LX Engine Oil Capacity: Change with Filter (qt.) 3.2 3.2 Engine Oil Capacity: Dry (qt.) 4.2 4.2 . . . POWERTRAIN . .

How much oil does a 2004 Civic take?

Engine Oil 3.5 quarts. . w/ofAfter refill check oil level. 3.7 quarts. (with filter)After refill check oil level.

What happens if you put too much oil in your car?

When too much oil is added, the level in the oil pan becomes too high. That allows a fast-moving lobed rod called the crankshaft to come into contact with the oil and essentially aerate it. The result is a foamy, frothy substance that cannot properly lubricate the engine.