How do you turn off the maintenance required light on a Honda Pilot?

Press and hold the “Select/Reset” button on the instrument panel. While continuing the hold the “Select/Reset” button, turn the ignition “ON“. Do not start the engine. Still continue to hold the button(s) for 10 seconds or until the Maint Reqd indicator resets.

What does maintenance required mean on a 2004 Honda Pilot?

December 17, 2020. If You notice that the maintenance light has turned on in Your 2004 Honda Pilot it means that it is due for an oil change. You should get this done or do it Yourself before You go about resetting the light. Once the oil change is done resetting the light is fairly easy.

How do you reset the maintenance required light on a 2006 Honda Pilot?

Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.

How do you reset the dash lights on a Honda Pilot?

Turn the ignition key to the “on” position while still depressing the reset button. Hold the button until the light turns off. Turn off the vehicle and wait 60 seconds. Start the engine and verify that the warning lights have turned off.

Why does my maintenance required light flashing then turn off?

It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt.

How do you reset the oil life on a Honda Pilot 2021?

How To Reset Oil Life Maintenance Light On Honda Pilot Turn on your car without starting the engine. If your vehicle has an ignition button, hit the POWER button twice without step on the brake. Go to the OIL LIFE display. Press and hold the RESET button to enter the reset mode. Select RESET.

How do you reset the B1 code on a Honda Pilot?

Press the Select/Reset button and hold it for 10 seconds until the oil life indicator and maintenance code start flashing. Keep holding the button until the oil life indicator resets to 100% and the Honda B1 service light disappears.

How do you turn off the SRS light on a 2003 Honda Pilot?

By the driver’s left foot on the sidewall you will see an uncovered fusebox. There, you will find a yellow connector (very similar to your home computer internet wire). Its the only yellow connector there. 4-) the SRS Light will come on for 6 seconds, then go off.

Where is the TPMS reset button on a Honda Pilot?

If your Honda is equipped with a TPMS button, you’ll find it to the left of the steering wheel. Press and hold the button until the warning light blinks twice.

Why is the maintenance required light on?

The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.

What does the triangle with exclamation point mean in a Honda Pilot?

There’s a simple explanation should you see a little triangle with an exclamation point in the middle light up your Honda vehicle’s dashboard. This warning light serves as an icon for your Honda vehicle’s Vehicle Stability Assist system and indicates that there is something wrong with the system itself.

How do you reset the dash light?

How to Reset the Warning Lights on the Dash Open the hood of your vehicle. Loosen the nut that holds the negative terminal to the battery with the pliers. Completely remove the cable from the negative battery terminal. Leave the battery disconnected for 10 minutes to ensure that the computer is fully reset.

Why does my car say maintenance required after oil change?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

What does it mean when my maintenance required light flashes 6 times?

That light blinking is to. remind you its getting time to change your engine oil via your mileage you have travelled. In 1000 more miles it will come on and stay on. Check your manual for more info and how to reset it.

What does change oil light look like?

Indicator Light | Engine Oil Level Engine Oil Level Indicator– This dashboard warning light looks like a lamp with a drop of oil dripping from it. Two, your vehicle is long overdue for an oil change. If this light illuminates, check your oil levels.

How do I reset my Honda Maintenance Code?

3rd Method Press home. Select settings. Press vehicle settings. Scroll down to maintenance info and press it to select it. Press reset. A screen will pop up asking if you really want to reset it or cancel. press reset and that should do it.

How do you reset the service light on a Honda?

If your display reads “Engine Oil Life”, select the Reset mode by pressing the Info button on the steering wheel. Then press the Select/Reset button to return your oil life to 100%. If your display reads “Engine Oil Indicator %”, press and hold the Select/Reset knob for more than 5 seconds.

What is B1 code for Honda Pilot?

If the Maintenance Minder in your Honda car, SUV or truck is showing a B1 service code, you may be wondering, “What is Honda B1 service?” The letter “B” means that your vehicle is due for an oil change and a mechanical inspection, and the number “1” means that a tire rotation is required.

How do I reset my oil life?

Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.