Is it safe to relight water heater pilot?

Do not attempt to relight a water heater pilot light (or any other work on the unit) if you smell gas in the area, indicating a gas leak; call 9-1-1 from outside the house. Herb Kirchhoff has more than three decades of hands-on experience as an avid garden hobbyist and home handyman.

How do you light a Richmond gas water heater?

Make sure the knob on the feed line is turned to “on”, then press and hold the ignition button down for 5 seconds and then release. This will light the internal pilot light. On some models the ignition knob is located on the outside of the tank, above the door, but the feed line will still be inside.

How do you relight a hot water heater pilot light?

Steps to relight the pilot light. Turn off the gas. Locate the gas shut-off valve on your hot water heater. The knob should be clearly labelled. Turn it to the “Off” setting, then wait 5-10 minutes to make sure all the gas has cleared.

What should I do if my pilot light goes out?

If a pilot light goes out, you can relight it with a match, using the proper precautions. Related Articles. On some gas-powered appliances — such as gas ranges, water heaters, boilers and gas fireplaces — the pilot light works to ignite the main flame when the gas is switched on to the burner by the regulating valve.

Where is the pilot button on a gas hot water heater?

Go back to the gas valve and turn the knob to “Pilot.” By pushing the knob down, you will start the flow of gas to the pilot. Some hot water heaters have a separate pilot button – if so, push that down instead.

How does the pilot light on a gas range work?

On some gas-powered appliances — such as gas ranges, water heaters, boilers and gas fireplaces — the pilot light works to ignite the main flame when the gas is switched on to the burner by the regulating valve. If the pilot light is not lit, the gas burner will not ignite,…

What happens when the pilot light goes out on a gas hot water heater?

The pilot light is a small, continually burning flame that ignites the burner of your gas hot water heater. Simply put, if the pilot light goes out, the unit can’t warm up water.

Who is the best person to relight a water heater?

Better yet, a plumber in West Covina, who is very knowledgeable about water heaters and licensed to maintain and fix them, is the best person to have relight the pilot as well as checking to see why the pilot went out in the first place.

Where is the pilot on a water heater?

The pilot can be located behind an access panel, or in a newer water heater, the pilot may be seen through a small glass window that doesn’t allow the pilot to be touched by human hands but can still be lit with an igniter. Check For Any Gas Leaks Once it’s determined that the pilot is out, the next step is to check for any leaks.

Why does my water pilot keep going out?

Therefore, a dirty thermocouple might be the reason why your water pilot keeps going out. A layer of dirt and grime can hinder the electric current from reaching the thermocouple. As a result, the gas supply will be cut off and the pilot light will go out.