How to install a Grohe thermostatic shower head?

Screw in the handle and put the cover back on. Make sure the seal in the hose is in the correct position and then screw the end onto the mixer. Make sure the shower head is operating properly. Congratulations, you have finished installing your new GROHE product. Check our other installation guides and discover all of our products on

Which is the best guide to install a shower?

Thanks to our installation guides, follow step by step instructions from our experts and easily install our faucets, shower systems and wall-hung toilet system.

Which is the best way to install Grohe bathroom faucets?

Even if the best solution to install these products is to make it done by professional, these very didactic videos will allow you to realize your installation in the best conditions to obtain an optimal result.

How to install a single lever shower mixer?

2 – Tighten the s union connectors with a 22 mm open-end wrench. 3 – Adjust the connectors so that there is a space of 150 mm centre to centre, and the same depth, as noted from your previous measurements. Then check They are level using a spirit level.

Where is the shut off valve on a Grohe shower?

The shower shutoff valve is sometimes inconveniently located within your drywall. In that case, turn off the main water supply to the house before continuing with this project. Next, you’ll need to remove the decorative trim.

Do you need to replace the Grohe shower cartridge?

If your Grohe shower includes a thermostatic valve or pressure-balancing valve, any malfunction affecting these might also warrant replacing the shower cartridge. You’ll be removing the components that normally hold back the water in the supply pipes, so it’s imperative to turn off the water to the shower before you begin.

How do you remove a valve from a shower?

Slide the second panel forward and set it aside. You should now see the main section of the cartridge and its various valves (or just one valve depending on the model), which have long “necks” sticking out of the rest of the assembly. You won’t know which removal method will work for your shower until you start taking it apart and fiddling with it.

Thanks to our installation guides, follow step by step instructions from our experts and easily install our faucets, shower systems and wall-hung toilet system.

Thanks to our installation guides, follow steps by steps our experts’ advice and install easily our faucets, shower systems and wall-hung toilet system.

How does a Grohe retro fit shower system work?

Ideal for retrofit or renovation, the GROHE Retro-Fit Shower System installs easily and quickly. Simply replace the existing shower arm and add the system components without altering any in-wall plumbing.

Even if the best solution to install these products is to make it done by professional, these very didactic videos will allow you to realize your installation in the best conditions to obtain an optimal result.

Where is the diverter on a Grohe shower?

Once installed, it’s easy to use; a quarter turn of the diverter lever (located at the bottom of the shower bar) switches water flow from showerhead to hand shower or you can have both outlets on simultaneously. If playback doesn’t begin shortly, try restarting your device.