Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance. It is one of the best materials and long-term solutions for protecting your home.

How long does paint last on cement board?

Standard Repainting If properly painted, fiber cement siding may hold its new finish between 7 to 15 years. Unless extenuating circumstances hasten the rate of deterioration, you can expect an attractive finish that should retain its beauty for approximately a decade.

How long can primed Hardie board last?

(The industry refers to this process as blow and go) And, the average paint life with that process is typically 6 to 8 years if the prep and application is performed correctly.

How often should fiber cement siding be painted?

If you purchase prefinished fiber cement siding, you don’t need to worry about painting it when it’s time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

How long should Hardie board last?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

Should you paint the backside of Hardie board siding?

All sides of the Hardie Board are painted (even the edges) and therefore the entire board is completely sealed. (Although Hardie Board comes from the factory without the back of the board primed, according to James Hardie’s support department, they say you can prime and paint the entire board.)

How do you clean hardiplank before painting?

Method: If using a brush, brush the siding’s surface dust or dirt, then rinse the area with a garden hose. If using a soft cloth, wet the cloth, then wipe the area in a side to side motion in the direction of the plank, shingle or panel siding until clean. From there, rinse the area with clean water.

Can you pressure wash HardiPlank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding. In fact, pressure washing fiber cement siding is one of the only ways you can damage this durable type of siding.

Should you caulk Hardie siding?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Does HardiPlank need primer?

Using The Proper Materials and Paint- For fiber cement or HardiPlank siding, a very good latex primer should be used to prepare the surface for paint. After your surfaces are primed it is strongly encouraged to use acrylic exterior paint for your home.

Article first time published on

Do you need to prime Hardie?

Whether you’ve got a ColorPlus finish or custom paint on your existing Hardie siding, you don’t have to use primer when re-painting Hardie. All you should have to do is rinse your siding (use a garden hose – no pressure washers here!) to clean off any dust or dirt.

Do you need to paint Hardie plank?

Painting Hardie board siding will significantly improve its look and its longevity. Siding finishes generally last for around 15 years, so you need to do it, and do it right. Painting, when done properly can really bring out the wood feel of the Hardie board.

Does Hardie board soak up water?

Hardie siding does a great job of wicking moisture when it is installed on the wall, but when it’s uncovered and flat on the ground it will absorb water. … Luckily, it takes lots of water to saturate Hardie products! It’s no problem for a contractor to install James Hardie products in light rain.

How often do you replace hardiplank?

Normal siding needs to be repainted once every 5 to 7 years, but James Hardie siding is made from fiber cement and doesn’t need to be repainted quite so often– a paint cycle can last as long as 12 years, and the paint prefinished James Hardy siding is warranted for 15 years.

How often does hardiplank need to be replaced?

There is some maintenance needed on Hardie Board siding after approximately 15 years. The ColorPlus Technology warranty covers your siding’s color for 15 years, and then you may need to repaint it.

Does mold grow on Hardie board?

It is highly susceptible to mold and mildew. Hardie Plank has many seams and the seams must be sealed or water can infiltrate behind the siding. It can crack and if it does, you must tear the whole wall down in order to replace just one plank. … It is mold and mildew resistant.

How do you remove green mold from hardiplank?

Use your soft sponge or cloth and lightly scrub the mold or mildew with the cleanser. Once it’s clean again, use your water hose to thoroughly rinse the area with water. A man power washing a house. Use caution when using a power washer to clean your fiber cement siding from James Hardie.

How do you get mold off of Hardie board?

Water Mild liquid dishwashing soap (Dawn®, Ivory®, or Joy® ) and water. Do not use any harsh cleaning chemicals. Mildew cleaners (Jomax®, Mildew Check®, Mold Armor®) and water.

Does caulking Hardie board void the warranty?

These such areas are called “field butt joints.” In the case of James Hardie’s Color Plus siding, which has a pro-rated 15-year warranty, using caulk at field butt joints will flat out void your warranty!

Can you use a roller to paint Hardie board?

A good quality roller will help you apply in even, smooth strokes, covering as much space as possible at one time. Just don’t hurry this process; it’s best to go slow. Painting is an art! When applying paint to your fiber cement siding, don’t make the mistake of putting too much paint on your brush.

Do you paint or stain Hardie board?

Hardiplank siding is a long-lasting, fireproof building material that resembles natural wood. Because it is a concrete-based product, it cannot be stained in the traditional sense.

Can you use screws on Hardie siding?

HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel. … Fasteners shall be installed between 1 in. and 3/4 in.

What is the best caulk for Hardie board?

ProductTypeWeightDAP INC 18152Silicone10.1ozGE Sealants & Adhesives M90015Silicone10.1ozDap 18001 Kwik Seal CaulkSilicone5.5ozGorilla White 100 Percent Silicone Sealant CaulkSilicone10.1oz

Can you screw into hardiplank?

James Hardie Building Products recommends keeping nails or screws at least 3/8 inch from the end of a plank. … Drill pilot holes, at each mark, one-quarter to one-half inch deep, to make it easier to insert screws and prevent cracking the siding.

Who invented Hardie board?

In the mid 1980s, the siding manufacturing company James Hardie pioneered its development. As the industry leader for decades, James Hardie and Hardie board have pretty much become a synonym for fiber cement siding.

How much does it cost to paint hardiplank?

Type Of SidingAverage Cost to Paint 1,500 sq.ft.Cost Per Square FootConcrete$1,500 – $5,250$1 – $3.50

Is hardiplank expensive?

You can expect it to be more expensive than vinyl siding, but it’s cheaper to use than brick or stucco and about the same price as other composite sidings. On average, Hardie board siding costs $10 per square foot — so, for example, a 1,200-square-foot exterior wall would cost around $12,000 to install.

What kind of paint do you use on fiber cement board?

Choosing siding with a UV-resistant finish will help to prevent fading and sun damage more than most products. Consider using 100% acrylic paint on fiber cement siding and working from top to bottom during the application (following any grain pattern).

What color is Hardie primer?

Our distinctive primers – green for HZ5 and gold for HZ10 – are engineered for climate and for use with paint on James Hardie fiber cement siding products.

Can HardieBacker be painted?

Can You Paint Over Hardiebacker? Paint HardieBacker board as you would drywall if you are painting, as recommended by the paint manufacturer. If you are painting, apply a drywall primer that is suitable for high-moisture areas.

How often do you have to paint board and batten?

Wood siding needs to be sealed with either paint, stain, or a sealer. Here’s the difference: Paint. Needs to be done about every five years, or as soon as you see it deteriorate.