How much space should be between shower valve studs?

Remember that the studs will be covered with 1/2-inch-thick cement board, plus the tiles (usually about 3/8 inch thick). No studs should be farther apart than 16 inches. On the plumbing wall, space the studs so you can position the shower faucet; a pair of studs spaced about a foot apart will accommodate most faucets.

Is there a Moen single handle shower valve?

Moen produces a variety of Single Handle Shower: Standard Valve. They are not assembled or repaired the same way. The articles below are listed based on the internal handle parts. To choose the correct articles you will want to identify your handle style.

What kind of faucet has a Moen cartridge?

The original Moen cartridge, the 1200 provided one-handle operation. It was used in all one-handle faucets, except the Posi-Temp shower valve, prior to the introduction of the 1225 in 1981. Currently used as a replacement cartridge for older one-handle faucets.

Is the Moen 1224 a two handle or three handle?

Prior to the introduction of Duralast® two-handle cartridges, the 1224 was designed to support all Moen two- and three-handle valves, including pot fillers as well as two- and three-handle non-pressure balancing tub and shower faucets. Stainless steel piston, Acetal shell for reduced corrosion, 90-degree rotation for hot and cold.

Where is the Moen cartridge valve stem located?

The cartridge valve stem is the moving piece inside the sleeve that is connected to the faucet handle and changes the mix between hot and cold and sometimes flow. Standard cartridges are designed for faucets, Roman tubs and tubs/showers. The original Moen cartridge, the 1200 provided one-handle operation.

Which is Moen valve for single handle shower?

If this is your valve see the articles below for technical information. If this is your valve, see Single Handle Shower: Moentrol Valve. If this is your valve, see Single Handle Shower: PosiTemp Valve. If this is your valve see Single Handle Shower: M-Core Valve. If this is your valve see Single Handle Shower: M-Core Valve.

The original Moen cartridge, the 1200 provided one-handle operation. It was used in all one-handle faucets, except the Posi-Temp shower valve, prior to the introduction of the 1225 in 1981. Currently used as a replacement cartridge for older one-handle faucets.

Prior to the introduction of Duralast® two-handle cartridges, the 1224 was designed to support all Moen two- and three-handle valves, including pot fillers as well as two- and three-handle non-pressure balancing tub and shower faucets. Stainless steel piston, Acetal shell for reduced corrosion, 90-degree rotation for hot and cold.

The cartridge valve stem is the moving piece inside the sleeve that is connected to the faucet handle and changes the mix between hot and cold and sometimes flow. Standard cartridges are designed for faucets, Roman tubs and tubs/showers. The original Moen cartridge, the 1200 provided one-handle operation.