Ford 9N PowerDrawbar (claimed):12.68 hp 9.5 kWBelt (claimed):20.29 hp 15.1 kWPlows:2 (14-inch)Drawbar (tested):16.31 hp 12.2 kW

How much horsepower does a Ford 8N tractor have?

Engine and Performance The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.

What's the difference between 8N and a 9N Ford tractor?

For starts, the 8n tractors have a four speed transmission while the order 9n tractors had a three speed transmission. … This lets you control your speed and power a bit more. One way you can easily tell between 8n and 9n Ford tractors is if it has foot pegs.

How many horsepower is a 1939 Ford 9N?

The 9N weighed 2340 pounds and had 13 drawbar horsepower, which could pull a two-bottom plow. It was designed to be safe, quiet and easy to operate.

What is the difference between a 9N and a 2N?

The 9N and 2N were agricultural tractors produced by Ford during the mid-20th century. Ford manufactured the 9N tractor from 1939 to 1942, then replaced that model with the 2N, which the company produced from 1942 until 1947.

How many horsepower is a John Deere 1020?

John Deere 1020 PowerDrawbar (claimed):33 hp 24.6 kWPTO (claimed):38.82 hp 28.9 kWDrawbar (tested):31.81 hp 23.7 kWPTO (tested):38.92 hp 29.0 kW

How many horsepower is a Ford 800?

The “800” and “900” both had around 40 HP with the “900” as the row crop tractor. The “1” Series. From 1957-62, Ford brought out a series where all the model numbers ended in a “1.” The first numeral – the ‘hundreds’ place – indicated the relative power and configuration.

Does 9N have live PTO?

One disadvantage of the Ford N’s was, they are not Live pto and Live hydraulic. When you push the clutch in, they stop. The mower stops mowing and if it was raised, it lowers to the ground.

How much can a Ford 9N lift?

Tractor hitchRear Type:IRear lift:800 lbs 362 kg

How do I tell what year my 9N Ford tractor is?

The 9 was for the year, 1939, and N was Ford’s designation for tractor. The original price was $585. The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

Article first time published on

How much horsepower does a Ford Jubilee have?

Ford NAA PowerDrawbar (claimed):20.2 hp 15.1 kWDrawbar (tested):26.8 hp 20.0 kWBelt (tested):31.14 hp 23.2 kWpower test details …

How many quarts of oil does a 9N Ford tractor take?

Engine OilOil capacity:6 qts 5.7 LOil change:200 h

What is a live PTO?

Live (two-stage clutch) A live PTO works with the use of a two-stage clutch. Pressing the clutch half-way will disengage the transmission while pressing it fully will disengage the transmission and the PTO. This allows the operator to slow down or change gears while the PTO is still operating.

How can you tell a Ford 2N from a 9N?

The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.

How much horsepower does a Ford 2N tractor have?

Ford 2N PowerDrawbar (claimed):12 hp 8.9 kWPTO (claimed):23 hp 17.2 kW

How many HP is a Ford 640?

Ford 640 PowerBelt (claimed):30 hp 22.4 kWDrawbar (tested):28.59 hp 21.3 kWBelt (tested):31.01 hp 23.1 kWpower test details …

What years did they make Ford 800 tractors?

The Ford 800 series of tractors consists of the 820, 850 and 860 models. The 820 was produced between 1955 and 1957, and the 850 and 860 were produced from 1954 to 1957.

How much does a Ford 850 tractor weigh?

DimensionsWheelbase:75.18 inches 190 cmWidth:64.75 inches 164 cmHeight:59.3 inches 150 cmOperating weight:3400 lbs 1542 kg

How many horsepower is a John Deere 1050?

John Deere 1050 PowerEngine (gross):37 hp 27.6 kWDrawbar (claimed):28 hp 20.9 kWPTO (claimed):33 hp 24.6 kWDrawbar (tested):27.25 hp 20.3 kW

How many horsepower is a John Deere 1520?

John Deere 1520 PowerDrawbar (tested):38.48 hp 28.7 kWPTO (tested):47.86 hp 35.7 kWpower test details …

What horsepower is a John Deere 2020?

What we know about the John Deere 2020 tractor is that it has a 4 cylinder Gasoline, or Diesel Engine that produces 45.9 horsepower at the drawbar. Shown left is a picture of the John Deere 2020 tractor. The John Deere 2020 tractor has a category 2 three point hitch and its pto tested at 54 hp.

Does a Ford 9N have a 3 point hitch?

Ford 9N Attachments – Implements The Ford 9N Tractor comes equipped with a 3 point hitch system with a PTO output. This will allow you to connect a wide variety of attachments to this tractor.

What's a Ford 9n worth?

A good condition Ford 9n tractor is about $3,000 if it’s a later model. A Ford 9n Tractor from the 1940’s is about $1,500. A mint condition 1939 Ford 9n tractor was going for $15,000 on the internet.

What is a Ford Golden Jubilee worth?

The preauction estimate is $5,000-$7,000 which is not unreasonable. While Golden Jubilee NAA’s aren’t difficult to find they are popular with collectors and in like-new condition can command premium prices.

What was the first Ford tractor with live PTO?

Ford came out with independent live PTO in 1959 in the Select-O-Speed equipped tractors.

When did Ford stop making tractors?

Henry Ford and Harry Ferguson.In 1928, Fordson tractor production was halted in the United States, only to be resurrected in 1939 as the Ford Model 9N.

When did Ford make the 4000 tractor?

Power Take-off (PTO)Rear PTO:transmission1000Engine RPM:[email protected]0 [email protected]1950

What year is Ford Jubilee?

Ford NAA tractor1953 Ford Golden JubileeOverviewManufacturerFordProduction1952–1954

What is a Golden Jubilee tractor?

The Ford NAA is a rare and desirable tractor that was introduced by Ford as an entirely new model in 1953 and dubbed the Golden Jubilee as part of their 50th year anniversary celebration. The NAA designation was a reference to the first three digits of the serial number style used starting with this tractor.

How much hydraulic fluid does a 9n Ford tractor hold?

Capacity is right at 5 gallons. Use 80w-90, straight 80w, or if it is a good tight one that needs to run in winter, a decent universal tractor/hydraulic oil of your choice.

How much oil does a 8n Ford Tractor hold?

Engine OilOil capacity:6 qts 5.7 L