Weep holes serve an important purpose of a home; they allow the home to “breathe” as some say. Since there are many chances for water to enter the home, weep holes allow for water exit.

What happens if there are no weep holes?

Badness happens when your walls don’t have weep holes. Without weep holes, water has only one place to go – inside your home’s walls, leading to mold, rot, and unpleasant, expensive structural issues.

How often do you need weep holes?

Varying according to local codes, typically these 3/8” openings are spaced apart every 24″or 32″ along the bottom of the wall. These openings are equivalent to a tiny sized welcome mat and open door. They are large enough to allow mice, roaches and other pests to enter the structure of the house.

Is it OK to cover weep holes?

Whatever you do, do not fill those weep holes. They’re an integral part of the drainage system to keep water from building up behind the brick. If allowed to contact any untreated lumber, this water will cause serious wood rot, mold and, eventually, structural problems with your home.

Should I buy a house with no weep holes?

There is no good reason to call out the absence of weep holes in a house as being defective or significantly deficient. The primary function of a weep hole is to allow water to exit the masonry wall cavity. Without proper flashing the weep hole cannot function as required.

Can a house flood through weep holes?

No. Unless your home is a submarine the exterior materials along with doors and windows are not watertight and will succumb to the flood waters. Standing water in contact with brick walls (or other veneers) will inevitably enter the structure and plugging weep holes will not improve the situation.

Can mice get in weep holes?

Weep holes help to prevent moisture damage and are necessary for the structural integrity of your brick house. Unfortunately, they are also a very common point of entry for mice and rats. Other pests can also use the weep holes in bricks to gain entry, like snakes, scorpions, lizards, bees, wasps, and spiders.

What happens if water gets behind brick?

So when water does penetrate through the brick and around fenestrations, it will simply roll down the barrier and make its way to the flashings. Failure to follow these precautions can cause substantial damage to a brick structure.

Can snakes get into your house through weep holes?

Rats, mice and lizards will get in the house thru weep holes, and snakes can go ANYWHERE they can go. Usually they will end up in the attic.

Do you need weep holes at DPC level?

There isnt normally a cavity tray at dpc level, unless in instances where the likes of a Radon Barrier is required, which should overlap inner wall, cavity and outer wall. You would then need a cavity tray above with weep holes.

Article first time published on

Where do weep holes go in a retaining wall?

Weep holes are small, evenly-spaced holes along the bottom section of your wall. They protect the structural integrity by allowing underground water to seep through, preventing pressure build-up. Every retaining wall should have them.

Are cavity trays necessary?

Cavity trays are a requirement in modern day construction. They prevent any accumulation of moisture in the cavity from travelling along the lintel and in to the Internal envelope of the building.

Can you concrete over weep holes?

You could concrete over them but if you get mould, rising damp, termites or other issues that can be avoided (these may happen anyway but less chance of it without the higher concrete) then you would need to accept it. The step down won’t be a big issue IMO. Re: Covering Weepholes?

Can weep holes cause leaks?

At the bottom of the wall, openings (called weep holes) are constructed in the brick mortar joints. … Moisture barriers and flashing that are improperly installed, missing, or have been torn and damaged during construction, can have gaps and holes, which could lead to water leaks into the house.

Do double brick walls need weep holes?

These are usually strong load bearing walls. There is an important cavity between the two ‘skins’, which allows water or moisture to travel down and using the combination of flashing and weep holes to leave the exterior of the building.

Can a rat fit through a weep hole?

It’s obvious that small pests such as cockroaches and spiders can crawl through weep holes, but vertebrate pests such as lizards, snakes and even mice can also squeeze through a normal weep hole.

Can you put steel wool in weep holes?

There is good news, there are some steps you can take to keep pests from entering your home through weep holes. First, you can use stainless steel wool to plug the holes. This will allow the holes to breath, but keep pests from entering. … Just a few puffs of Delta Dust in your weep holes will keep pests away for months.

Does flood water go through bricks?

Flood water will tend to find its way and penetrate “weak” points in the building such as areas where there is cracking. Cracks to walls, within the brick, blockwork, mortar joints or render, provide a direct path for floodwater to enter a property.

How do weep holes work?

Weep holes are holes or gaps along the bottom of the brick veneer which allow water to drain out from the wall. These holes also serve to provide ventilation in the air gap behind the brick veneer. Ventilation can help to dry out the interior wall layers after a weather event.

Can snakes come up through shower drains?

Since bathroom plumbing is usually connected through ventilation pipes on the roof, snakes can slither their way through the ventilation system and, soon, into your john.

Can snake climb up a wall?

The answer is that yes, some species of snake are excellent climbers, and can climb walls. … The snake must have something to grab ahold of and push off of. Not even a rough surface will do – snakes can’t “stick” to walls the way insects, rats, and lizards often do.

How do I get rid of snakes in my walls?

Snakes usually enter the home through holes or cracks in the outer walls or foundations (although some can climb very well), so check your exterior walls carefully and plug any gaps. Use fine metal mesh to cover vent holes and crawl spaces, and fill other gaps with spray foam.

How do I stop water from coming through brickwork?

To prevent water ingress through brickwork you should use a water repellent or façade cream such as Remmers Funcosil or Microshield Ultra. These products penetrate into brick, stone or concrete to provide long-lasting water repellency to building façades. You can browse our full range of Water Repellents.

How do I stop water seepage in my brick wall?

1. Replacement of sealant of joints in masonry wall.
2. Grouting of mortar joints.
3. Tuck pointing mortar joints.
4. Ivy removal.
5. Opening weep holes.
6. Replacement of deteriorated masonry walls.
7. Installation of damp proof course.
8. Installation of flashing.

Is a cavity tray at DPC?

A cavity tray is a damp-proof course (DPC) that crosses the cavity of a cavity wall in order to prevent dampness from permeating the internal skin of a wall.

Can I use DPC as a cavity tray?

High Bond DPC can be used for cavity tray applications including parapet walls, beneath copings and cappings. High load DPC should be used where it will be subject to a full storey of masonry. At complicated junctions, clear drawings and the design should be provided, and preformed cavity trays used.

How high is damp proof?

A damp-proof course is a barrier, usually formed by a membrane built into the walls of a property, typically 150 mm above ground level, to prevent damp rising through the walls.

What is purpose of weep holes in retaining wall?

Weep holes provide an opening that allows the drainage of any moisture that may come from back of the wall through penetration, capillary action or leakage.

Does a 2 foot retaining wall need drainage?

These walls need a drainage system regardless of the wall height. If there are poor draining soils such as clay behind the wall, there needs to be drainage incorporated the wall system. Clay when wet is very weak, so it is essential to provide a way for water to escape from behind the wall.

Why is drainage behind a retaining wall important?

Retaining wall drainage is essential to building a good retaining wall. … The weight of the earth or gravel behind the wall is an acting force that the retaining wall must withstand, and any water absorbed behind the wall adds compounding pressure that can result in shifting, bulging or total collapse.

Can cavity trays fail?

Problems can occur when the cavity tray goes under any flashings or DPC’s associated with the detail. Failure to extend the cavity tray in front of the window head may divert water down the face of the frame or onto the back of the frame, where it may accumulate in weathering grooves.