The easiest rule to apply is the one below. If the rating plate has a double box then the appliance is Class 2. If it does not then it is Class 1.

How do you tell if an appliance is Class 1 or 2?

The easiest rule to apply is the one below. If the rating plate has a double box then the appliance is Class 2. If it does not then it is Class 1.

What is a Class 1 electrical appliance?

Class I appliances are usually made of metal, have three cables, have a metal Earth pin, and have a fuse in the plug. … Examples of Class I appliances are refrigerators, microwaves, kettles, irons, and toasters. Appliances under Class I have two levels of protection: the basic insulation and the earth connection.

How do you do a class 1 PAT test?

On the PAT tester, one simply presses the Class 1 button to carry out the Earth Continuity and Insulation Resistance tests. As this is a Pass/Fail tester one just records the PASS or the FAIL on the Equipment Test Record. If the tester gave an actual test value then this is recorded.

Is a fridge a Class 1 or 2?

Typically fridges, microwaves, toasters are all Class 1.

Do fridges need PAT testing?

For landlords, it’s good practice to have all your appliances PAT tested before a new tenant moves in. After this, smaller appliances should be tested every two years and larger items like fridges and washing machines should be tested in four-year intervals.

Where would you look to determine the class of an appliance?

Identifying an Appliance Class Generally, the easiest way to identify an appliance is simply to look at the symbol. For PAT testing, you’re more than likely only going to be testing Class I/II appliances, so you can easily identify each of these by the symbol on the appliance itself.

Can I do my own PAT testing?

Yes, your business can carry out its own PAT tests, as long as the person doing the testing is a ‘competent’ person. If you decide to do your own PAT testing we would strongly recommend taking a PAT testing course as it’s important to perform the PAT tests correctly.

Can I pat test myself?

In theory, yes, you can PAT test without a qualification. … The Portable Appliance Testing Trade Association say that you should undergo thorough training by a competent person in order to become competent yourself.

Do cookers need PAT testing?

No. The law simply requires an employer to ensure that their electrical equipment is maintained in order to prevent danger. It does not say how this should be done or how often.

Article first time published on

What is a Class 2 appliance?

A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth (ground).

Is a dishwasher Class 1 or 2?

Combine this with the fact that the vast majority of stationary appliances are Class 1 such as Washing Machines, Fridges, Dishwashers, Vending Machines and Industrial machinery the recommended frequency can range from 3 months on a construction site (110 volt equipment) to 48 months in low risk environments such as …

Should an earth bond test be carried out on Class 1 equipment?

Class 1 “No Earth” The way to approach these appliances is generally to omit the earth bond test. After all if no-one including yourself can touch metalwork then neither can a user.

What is the difference between Class 1 & Class 2?

The difference is very simple – a Class 1 licence allows you to drive a category C+E vehicle, which is basically an articulated lorry, or artic. A Class 2 licence allows you to drive a category C vehicle, or what is frequently referred to as a rigid.

What is class1 wire?

A class 1 circuit is the portion of the wiring system between the load side of the overcurrent protection device (OCPD) or the power-limited supply and the connected load. … Class 1 circuits can be 600 volts or less, but 120 volts are more common and are usually preferred by OSHA inspectors for safety reasons.

What items are class1?

• Class 1 Appliances.
• These are electrical appliances which require earth protection. …
• ( Fridge / Freezers, Washing Machines, Tumble Dryers, etc. ).
• The Cable plugged into the mains is 3 core which includes Brown wire (Live), Blue (Neutral) and Green / Yellow which is the Earth cable.

What is Class 3 in PAT testing?

Class 3 refers to low voltage items. They are the least dangerous and therefore the safest class of electrical appliance. Class 3 items do not need to be PAT tested, although any charging leads should be checked.

How do I become a PAT tester?

The most commonly accepted way to be deemed competent is to take a PAT training course and be presented with a Certificate of Competency in PAT testing. Here at ETC, we’ve helped everyone from professional electrician to employees in charity shops get the qualification they need to check their appliances for safety.

What is classed as a portable appliance for PAT testing?

Any appliance that uses a flexible cable or plug and socket qualifies as a portable appliance. In other words, if you have an appliance that has a plug that is intended to be connected to a wall socket or generator, it qualifies as needing to be PAT tested.

Is Pat testing a legal requirement for landlords 2020?

PAT testing is not a legal requirement for landlords but it’s a recommended way for them to keep your home safe. You can check the electrician is registered to carry out inspections and do repair work.

Do integrated appliances need PAT Testing?

Integrated appliances and hard wired appliances p where the plug point is not accessible a visual inspection and an earth test (where appropriate) will be performed. … Also Exhibition Centers and Public Halls, both the venue and and users bringing in equipment need PAT testing.

Do brand new electrical items need PAT Testing?

If you’ve bought brand new electrical equipment, it doesn’t need PAT Testing for the first two years – unless, of course, your visual checks flag any concerns. A common misconception is that visual checks aren’t needed if you’re up-to-date with your PAT Testing – nope, that’s not right.

How long does a pat test take?

PAT testing usually takes about 1 hour to complete. In that time, an engineer will usually perform around 30 tests. To ensure everything runs smoothly, make sure appliances and equipment are easy for the engineer to access and that no walkways are obstructed.

Can you pat test with a multimeter?

Most multimeters, while perfectly capable of testing resistance, do so with a low voltage. The specification of one instrument claiming to be a PAT tester, states that it uses a voltage of 9V which is way too low to properly stress the insulation and highlight any faults.

How often should a PAT test be done?

A general rule of thumb is that PAT testing should, at a minimum, be carried out every 2 years. But this is a general indication, and certain factors should be considered to determine the frequency of testing for your circumstances. These include: Location of the equipment.

Is an extension lead Class 1 or 2?

Extension leads are classified as appliances in their own right and should be Class I; an earthed appliance. For safety, extension leads should not be used as a long term solution. This is because they are a trip hazard and because appliances are designed to be plugged into the mains, not extension leads.

Is 110V class 1 or 2?

A 110V transformer is a Class I, 230V appliance.

Why would a fridge fail a PAT test?

There are several reasons why appliances may fail PAT testing, including: Incorrect use of the appliance. … Incorrect readings from the PAT tester. Incorrect PAT tester for the job.

How do you test appliances for earth leakage?

To perform this test, plug the appliance into a PAT tester and connect up a test lead to a metallic part of the appliance. This, again, will power the appliance, so if you’re testing a drill or rotating machinery ensure that the appliance is secured so as not to cause harm.

Is Pat testing a legal requirement?

There is currently no legal requirement to PAT test but employers are legally required to create a safe working environment and PAT testing is a great risk management strategy.