How do you take apart a one handle faucet?

Removing a Single-Lever Faucet

1. Step 1: Turn off Main Water Valve. Before even starting to remove the single lever faucet, make sure you turn off the main valve of your water.
2. Step 2: Detach the Handle.
3. Step 3: Remove the Valve Screw.
4. Step 4: Undo the Faucet Screws.
5. Step 5: Remove the Metal Ring.
6. Step 6: Remove the Faucet.

How does a single lever faucet work?

A ball faucet, commonly used in kitchen sinks, has a single lever controlling a slotted ball that aligns with the cold and hot water. Regulate the water pressure by raising the lever, which lifts the ball to let the water through. The temperature is adjusted by moving the lever from side to side.

How to disassemble a single lever kitchen sink faucet?

Turn off the water from under the sink or at the main supply to the house. Turn on the faucet and let all the water drain out. Lay a towel in the drain so no parts fall into it. Enjoy Low Rates and Step-By-Step Guidance. Contact Us Today! No mortgages found.

Do you have to replace the handle on a kitchen faucet?

You may have to replace the handle, but not the entire faucet. If the Allen screw is stuck, or if you strip it so it won’t come out, remove the cap with the handle still in place. You can’t grab the flattened edges with the handle in place.

Why do I need a single lever faucet?

A single-lever faucet gets a lot of use because the lever is continually moved to change the water from hot to cold. After awhile, the parts break down and you may get a leak from the base or a drip from the spout.

What’s the best way to take a bathroom faucet apart?

Expert advice on how to take apart bathroom faucets, with illustrated diagrams of how a compression, ceramic-disc, ball and cartridge faucet works. First turn off the water supply valves under the sink and place a towel in the sink to prevent scratches and to catch any dropped parts. Then remove the handle.

How do you take a handle off a kitchen sink faucet?

Loosen the screw that holds the handle onto the faucet. Turn it clockwise until the handle comes off, using an Allen wrench or a screwdriver. Take off the cap. Loosen the screws or nuts that hold the cartridge in place.

What to do if your Moen faucet handle breaks?

Moen Kitchen Faucet Broken Lever Handle Repair – YouTube My Moen Kitchen Faucet single lever handle came off. It turns out that a small screw broke that held the lever handle in place. This situation can be repaire…

Where is the handle on a single handle faucet?

Disassembling the faucet in order to replace the seals — or the cartridge itself — is a minor plumbing task. The basic American Standard single-handle faucet has a swivel spout, and its lever-style handle is located at the base of the spout.

Do you need Allen wrench to remove faucet handle?

1. The screw may be a set screw and therefore you will need the correctly sized Allen Wrench Also, remember you will want to close or cover the drain so that you will not loose a screw down it as they can be tiny! 6. Once the screw has been removed, you should be able to pull the handle off yourself.