How do you reset the timer on a Kenmore water softener?

To program the time of day hold the select 1 button in for 3-5 seconds. You will get the flashing time of day and the up and down arrows should adjust the clock to the correct time. Be sure to get AM or PM correct.

How do I change the timer on my water softener?

Instructions

1. Disconnect electrical power. Unplug the water softener to disconnect power.
2. Remove the top cover. Open the lid and release the 2 front clips on the cover.
3. Remove control panel.
4. Remove the salt storage tank light.
5. Remove the timer.
6. Install the new timer.
7. Reinstall the control panel.
8. Reinstall the top cover.

Why is there no water in my softener?

Water Softener: No soft water. An empty salt tank, salt bridge, depleted resin, clogged or damaged venturi, broken rotor position switch or failed timer can prevent the water softener from producing soft water. If your water is hard, check the salt tank first. Fill the tank with salt if it’s empty.

When to replace a whirlpool water softener timer?

If there’s power to the water softener but the display is blank, or if the control panel won’t work when you touch a button, replace the timer with the manufacturer-approved water softener part. Use this procedure to replace the timer in Kenmore, GE and Whirlpool water softeners.

How to troubleshoot a Kenmore water softener switch?

Here are the steps to replace this switch: Step 1: Unplug the unit. Step 2: Remove the lid of your softener so you can see the motor. Step 3: The problem may be a faulty switch – unscrew the metal plate at the top of your unit being careful not to dislodge the gasket in the center of the plate.

What does error code 1 on Kenmore water softener mean?

Error code #1, meaning a valve motor failure, is one of the more common codes you will have displayed. If your Kenmore water softener display is showing Error Code #1, you can try the following: Step 1: Unplug your softener and then plug it back in.

Where can I buy Kenmore water softener in Ontario?

Since Sears has closed and you can no longer take your product directly into a store for maintenance or repair, we can help. You can trust WaterSmart to service your Kenmore water softener in Southern Ontario, as we have been proudly servicing Kitchener, Waterloo, Cambridge and Guelph for 25 years.

Why does my Kenmore water softener stop working?

When your water softener stops working, get the Kenmore water softener parts you need to fix the problem at Sears PartsDirect. Lack of electrical power, a failed power transformer or a faulty timer can prevent the water softener display from lighting up.

What are the parts for a Kenmore water softener?

We have Kenmore Ultrasoft 280 parts as well as Kenmore 350 Series water softener parts. Look up the Sears water softener parts you need on our convenient parts list diagrams for your model.

What does the timer do on a water softener?

The timer is an electronic control board that lets you program the water softener. The timer also controls the functions such as water softening and flushing the resin filter. Replace the timer if it fails to control the water softener’s functions.

Error code #1, meaning a valve motor failure, is one of the more common codes you will have displayed. If your Kenmore water softener display is showing Error Code #1, you can try the following: Step 1: Unplug your softener and then plug it back in.