How do you replace a bathtub lever handle?

Helpful Tips and Tricks for Each Step of this Project

1. Step 1: Turn off the water to your house.
2. Step 2: Pry the cap off to expose the screw.
3. Step 3: Remove the screw and pull the handle off.
4. Step 4: Remove the faceplate and casing.
5. Step 5: Put on the new casing and faceplate.
6. Step 6: Install the new bathtub faucet handle.

Is it hard to replace bathtub hardware?

If your bathtub faucet is old or broken, you can easily replace it with a new one all by yourself. The process is the same whether you have a single handle faucet or one with multiple controls. If you want to change your faucet handles, you need to remove them along with the stems connecting to the pipes.

How do you fix a bathtub handle?

How to Replace Shower & Bathtub Handles

1. Examine the handles.
2. Pry off the plug with a slot screwdriver.
3. Unscrew the screw holding the handle to the valve stem, using a No.
4. Pull the handle toward you and it should slide off the valve stem.
5. Use an Allen wrench to loosen the nut holding a lever-style handle in place.

How do I fix a leaky faucet in my bathtub?

How it’s done

1. Shut off the water supply. The first step when fixing a leaky bathtub faucet is shutting off the water supply.
2. Remove the cap from the faucet.
3. Unscrew the handle screw.
4. Remove the handle.
5. Remove the escutcheon.
6. Remove the stem assembly.
7. Check the washer.
8. Replace the washer.

How to replace the handles on a bathtub?

This video discusses how to find the proper replacement bathtub faucet handles – shows how to remove the cover to access the screws holding the handles – shows removing the screws and prying off the old handle – installing the new handles and installing the cover over the screws. Loading…

How to fix a leaking bathtub faucet handle quick and easy?

Here is how to fix it quick and easy! If the faucet handle is stuck, a puller can get it off. Get it here: Get bathtub faucet washers here: Loading…

Do you need a handle puller for a bathtub faucet?

You may need a faucet handle puller if the handle will not come off by hand. Place a socket wrench over the bathtub faucet stem until it covers the hex nut. Turn the wrench counterclockwise to loosen the nut until you can pull the stem free. Repeat the steps if you have a two-handle system.

Is it necessary to replace the handle on a shower?

Replacing shower and tub faucet handles is one of the least challenging of plumbing tasks. Before undertaking any type of faucet repair, it’s a good idea to turn off the water supply, but this step isn’t critical if all you plan to do is change the handles.

How do you change faucet in bathtub?

Position the new washer where the old washer previously was and re-tighten it to the valve assembly with a screw. Replace the valve assembly by turning it clockwise and re-tighten it to the fixture with the pipe wrench. Screw the faucet handle back onto the valve assembly and replace the decorative cap.

How do I replace bathroom sink faucet handles?

Replace Bathroom Faucet Handles In Six Steps Step 1 — Remove Cap Cover Step 2 — Remove Retaining Screw Step 3 — Remove Old Handle Step 4 — Insert New Handle Step 5 — Secure with Screw Step 6 — Add Cap

How do you remove a bathtub faucet?

Remove Faucet Handles. Turn the shut-off valve on the water line for the shower and tub to turn off the water. Turn off the water at the water main if you don’t have a shut-off valve for the tub and shower. Turn the faucet handles on to drain water remaining in the lines.

How do you remove a shower handle?

1. Use a utility knife to remove the protective cap from the shower-valve handle. 2. Unscrew and remove the handle. 3. Unscrew and remove the plate from the shower wall. 4. Turn the screws on the shut-off valves to the right to stop the flow of water.