How do you remove a tub faucet surround?

Remove Faucet Handles

1. Turn the shut-off valve on the water line for the shower and tub to turn off the water.
2. Place the tip of a screwdriver beneath the edge of the decorative cap on a handle to pry it off.
3. Turn screws in the center of the faucet handles counterclockwise to remove them, and pull the handles off.

How do you remove the plastic from a bathtub faucet?

Insert a flat-head screwdriver into the notch to pry the plastic insert out of the handle. Insert the blade of a utility knife in the seam between the insert and the faucet handle, if there is no notch present. Twist the utility knife handle up and down to pry the insert off.

Is it easy to remove and replace a tub faucet?

Once you remove your old faucet, installing a new one is easy. As long as you take the correct steps, you can remove and replace your tub faucet in no time! Look on the underside of the faucet to locate the screw. Slip-on spouts will have a set screw under the spout, near the tub wall. The set screw secures the spout onto the water supply pipe.

How do you remove a tap cover from a faucet?

Go to your local hardware store and purchase a strap wrench: The rubber strap wraps around and grips the cover. Then you rotate the wrench anticlockwise to unscrew the cover off the tap.

Can a pipe wrench be used to remove a bathtub faucet?

Turn the bathtub faucet spout counterclockwise with the pipe wrench until you can twist the spout by hand. Remove the wrench and finish unthreading the spout by hand and remove it from the wall.

How to replace the handles on a bathtub?

This video discusses how to find the proper replacement bathtub faucet handles – shows how to remove the cover to access the screws holding the handles – shows removing the screws and prying off the old handle – installing the new handles and installing the cover over the screws. Loading…

Once you remove your old faucet, installing a new one is easy. As long as you take the correct steps, you can remove and replace your tub faucet in no time! Look on the underside of the faucet to locate the screw. Slip-on spouts will have a set screw under the spout, near the tub wall. The set screw secures the spout onto the water supply pipe.

Turn the bathtub faucet spout counterclockwise with the pipe wrench until you can twist the spout by hand. Remove the wrench and finish unthreading the spout by hand and remove it from the wall.

Go to your local hardware store and purchase a strap wrench: The rubber strap wraps around and grips the cover. Then you rotate the wrench anticlockwise to unscrew the cover off the tap.

What’s the best way to replace a slip on faucet?

When removing a slip-on spout, remove the set-screw at the bottom of the spout. Use an Allen wrench or appropriate screwdriver based on the type of screw. Pull the spout from the wall with both hands. When removing a threaded spout, place the jaws of locking pliers or a pipe wrench around the spout and tighten until secure.