How do you remove a Thetford RV toilet?

Disconnect the fresh water supply line and lift toilet straight up. For Aqua-Magic IV, disconnect the water supply line from the water valve located on the rear of the toilet. Remove the nuts from the closet flange bolts located on each side of the toilet. Carefully lift and remove the toilet from the closet flange.

How do you remove a Thetford c200cw toilet?

Lift the toilet clear of the back wall and take it out. On some models the tanks are held to the back wall by means of a bracket that the tank is slotted on to, so lifting the toilet straight up will lift it clear just in case yours is one of that type.

How do you remove an old RV toilet?

How to Remove an RV Toilet

1. Step 1: Empty the Waste Tank. First, ensure your RV is parked on a flat surface.
2. Step 2: Prepare the Toilet. Make sure the power to the water pump is cut off, so running water doesn’t interfere with the toilet removal and cause a mess.
3. Step 3: Unscrew the Bolts.
4. Step 4: Remove the Toilet.

Can a Dometic toilet replace a Thetford?

Both Thetford & Dometic toilets will interchange with each other and these newer models are much more water efficient. Both Thetford & Dometic still offer plastic toilets that perform great and are an excellent value. Here’s a quick video on RV toilet replacement.

Can you replace an RV toilet with a regular toilet?

The flushing mechanism and water usage are the main reasons you cannot use a standard house toilet in your RV. While they have the exact same use, RV toilets and house toilets do not work in the same way; the two are not interchangeable.

What is a Thetford cassette toilet?

Combine the comfort of RV permanent toilets with the convenience of portable toilets and add a holding tank.

What is the tallest RV toilet?

The tallest we have are each a full 20-1/2″ in height, they are the Dometic part-timer RV toilet w/ sprayer, # DOM97FR in white ceramic and the Dometic round bowl with slow close lid in tan ceramic, # DOM47FR.

Is Thetford the same as Dometic?

Both Dometic and Thetford are European-based brands with extensive Australian service networks.

What model is my Thetford toilet?

Using the data sticker to identify your Thetford toilet model. If you are not sure which model toilet you have, you will find a data sticker attached to the base of the toilet beneath the waste holding tank. The model number will be printed at the beginning above the barcode – as shown below.

Where are the bolt covers on a Thetford toilet?

Thetford toilets usually have two toilet bolt covers. Depending on the model of the toilet, there will either be a bolt cover at the front and back of the toilet or at the left and right side of the toilet. Remove the bolts using a half-inch socket wrench.

What to use to replace bolts on toilet?

Use a sponge to absorb all water that’s left in the toilet tank before we go to the next step. step 3. Remove the plastic caps that are covering the toilet bolts on either side of the toilet. You can use a flat screwdriver to remove these plastic covers.

How to remove a Thetford toilet from a motorhome?

Lift the Thetford toilet straight up off the closet flange. Once you’ve removed your Thetfort toilet from the flange, consider placing a cloth rag across the hole. This will keep odors at pay and prevent anything from falling into the black water tank.

How do you remove bolt cover on RV toilet?

Use a flathead screwdriver to remove the toilet bolt covers, if they are installed. Thetford toilets usually have two toilet bolt covers. Depending on the model of the toilet, there will either be a bolt cover at the front and back of the toilet or at the left and right side of the toilet. Remove the bolts using a half-inch socket wrench.

Thetford toilets usually have two toilet bolt covers. Depending on the model of the toilet, there will either be a bolt cover at the front and back of the toilet or at the left and right side of the toilet. Remove the bolts using a half-inch socket wrench.

Lift the Thetford toilet straight up off the closet flange. Once you’ve removed your Thetfort toilet from the flange, consider placing a cloth rag across the hole. This will keep odors at pay and prevent anything from falling into the black water tank.

Use a sponge to absorb all water that’s left in the toilet tank before we go to the next step. step 3. Remove the plastic caps that are covering the toilet bolts on either side of the toilet. You can use a flat screwdriver to remove these plastic covers.

Use a flathead screwdriver to remove the toilet bolt covers, if they are installed. Thetford toilets usually have two toilet bolt covers. Depending on the model of the toilet, there will either be a bolt cover at the front and back of the toilet or at the left and right side of the toilet. Remove the bolts using a half-inch socket wrench.