How do you remove a Delta sprayer hose?

How do I disconnect the Quick Connect once it has been attached? Pinch together at the base of the black plastic halves, next to the hose. The top halves will spread apart. Pull down gently.

How do I remove Hydrolock connection?

To disconnect a Duralock fitting, grasp the hoses on both sides of the fitting and push them together while you depress the black button on the fitting. When the button is fully depressed, it unlocks the connection so you can pull the hoses apart.

How do you replace a side spray valve?

1. Snap the side spray retainer to end of the side spray hose. 2. The side spray hose and retainer will click into valve body for secure connection. Note: This piece will only fit in one way.

How do you replace a side spray hose?

1. Squeeze together the tabs on the retainer and pull down from the valve body to disengage. 2. Remove the the retainer from side spray hose. This will allow the hose to pull through the hose guide. 3. From above the sink, grab ahold of the side spray and pull through the hose guide. 1. Snap the side spray retainer to end of the side spray hose.

How do you pull out a faucet sprayer?

1. Remove the hose weight. 2. Use a channel lock or pliers to unthread the hose coupling off of the threaded metal faucet body 3. Grab ahold of the sprayer and pull the hose out through the faucet toward you. 1. Tighten the spray wand onto the hose. 2. Insert the hose into the opening of the faucet body and feed through. 3.

How to replace a side spray valve Moen?

Replacing a Side Spray 1 Snap the side spray retainer to end of the side spray hose. 2 The side spray hose and retainer will click into valve body for secure connection. Note: This piece will only fit in one way. 3 To test this, gently tug on the quick connect.

1. Snap the side spray retainer to end of the side spray hose. 2. The side spray hose and retainer will click into valve body for secure connection. Note: This piece will only fit in one way.

1. Squeeze together the tabs on the retainer and pull down from the valve body to disengage. 2. Remove the the retainer from side spray hose. This will allow the hose to pull through the hose guide. 3. From above the sink, grab ahold of the side spray and pull through the hose guide. 1. Snap the side spray retainer to end of the side spray hose.

1. Remove the hose weight. 2. Use a channel lock or pliers to unthread the hose coupling off of the threaded metal faucet body 3. Grab ahold of the sprayer and pull the hose out through the faucet toward you. 1. Tighten the spray wand onto the hose. 2. Insert the hose into the opening of the faucet body and feed through. 3.

How do you replace a pull out water hose?

Before replacing any parts we recommend turning off all water connections. 1) Unscrew the pull out spray head from your hose. Disconnect the spray hose brass adaptor or quick connect ( see article 1650) and remove the weight or spring kit under the sink.