NAIL TYPE: Fasteners must be corrosion resistant, galvanized or stainless steel. Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.

What nails do you use for Hardie siding?

NAIL TYPE: Fasteners must be corrosion resistant, galvanized or stainless steel. Electro-galvanized nails are acceptable for use with James Hardie Siding Products, but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.

Do you nail or screw Hardie board?

What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs.

Can I install Hardie siding myself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

What do you fasten Hardie board with?

Fasteners must be corrosion resistant, galvanized or stainless steel. James Hardie prefers and recommends installation of HardiePlank® lap siding by the blind nailing technique, such that fasteners are hidden by the course above. Fasteners shall be installed between 1 in. and 3/4 in.

Can you screw into Hardie board siding?

James Hardie Building Products recommends keeping nails or screws at least 3/8 inch from the end of a plank. … Drill pilot holes, at each mark, one-quarter to one-half inch deep, to make it easier to insert screws and prevent cracking the siding. Align the bracket holes with the pilot holes in the siding.

Do you caulk Hardie plank siding?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Can I use a framing nailer for Hardie siding?

With some overlap in nail size, you may wonder whether framing nailers can be used for siding? The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing.

What goes behind Hardie siding?

Hardie™ Weather Barrier is installed over the sheathing—beneath the exterior siding—to reduce water and air infiltration. I’ve been using Hardie siding in the Texas heat for over 10 years. The homes I built then still look brand new today.

Can you install Hardie plank directly to studs?

HardiePlank® lap siding can be installed over braced wood or steel studs spaced a maximum of 24″ o.c. or directly to minimum 7/16″ thick OSB sheathing.

Article first time published on

How do you stagger Hardie siding?

It’s best to stagger the joints in each successive course to avoid noticeable patterns. Butt joints in adjacent courses should be spaced apart by at least two stud bays for 16-inch, o.c. framing or one bay for 24-inch, o.c. framing.

Do you need insulation under Hardie siding?

Hardie Plank is a cement board; it’s composition is sand and water. It is heavy on the wall and provides no insulation value. Formed to resemble wood, it fails to provide a deep, rich grain and does not come close to the look of wood. It is highly susceptible to mold and mildew.

Do you need special screws for Hardie board?

James Hardie recommends 1-1/4” long galvanized or STAINLESS steel roofing nails or 1-1/4” long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8” HD.

Can you use a nail gun on Hardie plank?

Overall, only two types of power nailers work best for attaching hardie siding: siding and roofing nailers. But if you must use a framing nailer, to install any James Hardie product, be sure to fit it with a quality flush mount attachment so as to control the depth the fastener is driven.

Can you pressure wash hardiplank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding. In fact, pressure washing fiber cement siding is one of the only ways you can damage this durable type of siding.

Can you use roofing nails for Hardie siding?

You can shoot Hardie siding on with air powered nailers or use hand driven roofing nails to attach siding to the home or structure. The nails can be ringed- shanked or smooth just make sure you are hitting the studs in the wall. … Our Crews prefer 1 3/4 “ smooth shank roofing nails for Hardie installation.

How much do you overlap Hardie siding?

Each row of siding should overlap by 1¼” or more.

Do I need house wrap behind Hardie siding?

With fiber cement siding, the heavy material may compress the wrap so it’s extremely important that a non-woven wrap is used. … This is because the heavy siding may lead to a build-up of moisture behind it, which in turn, can lead to mold growth and wood rot if that moisture is not properly addressed.

Do you need a special blade to cut Hardie board?

Cement Board-Cutting Tools For some types of Hardie board, you’ll need a power tool with a cement board blade with a carbide tip to cut the board. Carbide-tipped blades are made specifically for this kind of work. … Once prepared, cut the Hardie board as you would any other material.

What size nails do you use for Hardie board?

James Hardie recommends using stainless steel finish nails when installing HardieTrim products. Use a 2 in. finish nail to fasten trim together.

What is the difference between a roofing nailer and a siding nailer?

Both tools are coil nailers that are built to drive nails into wood, but you can’t use them interchangeably. … Siding nailers are for installing siding and roofing nailers are meant for installing roofing.

Do you have to put plywood under Hardie plank?

Fiber cement siding should be installed over plywood, OSB, or sheathing. Be sure that the siding installed is dry. Otherwise, it might shrink at butt joints.

Do you need to caulk Hardie board and batten?

Ugly Caulking Wherever Hardie siding meets a trim board, the company recommends you leave a 1/8” gap between the siding and the trim and apply a 3/8” bead of approved caulking to protect and seal the edge of the siding.

How do you nail Hardie?

For Hardie siding, it’s recommended to use stainless steel or hot-dipped galvanized nails. You can either nail by hand or use a pneumatic nailer. However, it’s best to use a pneumatic nailer for speed and consistency. At the bottom, the siding should be face nailed, and at the top, it should be blind nailed.

Do you caulk batten strips?

By running a bead of caulk in the seams on both sides of the battens, you’ll create a water-resistant seal that keeps water from seeping beneath the siding. Use paintable exterior latex caulk if you plan to paint the siding, or choose clear exterior latex caulk if you’re going to apply a clear-coat seal to the siding.

Should siding seams be staggered?

Stagger the siding end laps so that no two courses (rows of panels) are aligned vertically, unless separated by at least three courses. Always overlap joints away from entrances and/or away from the point of greatest traffic. This will improve the overall appearance of the installation (Fig. 37).

How wide is Hardie plank?

HardiePlank lap siding comes in 12-ft. lengths. Nomi- nal widths from 51/4 in. to 12 in.

Can hardiplank be installed over existing siding?

According to the best practices manual from James Hardie, existing siding can be used as a substrate as long as it is in good condition, meaning that it is not warped, bowed, curling, delaminated, or rotting. … If none of these potential problems are present, the existing siding is probably fine to use as the substrate.

Does hardiplank add value to home?

James Hardie siding will not only give your home a whole new look and feel; it will also significantly increase its value, as it has consistently been ranked one of the top projects with the highest return on investment by Remodeler Magazine’s Cost vs. Value report.

Is Hardie board more expensive than vinyl siding?

Cost. There is no doubt about it, the advantages of hardie board come with a cost. Vinyl siding is far less expensive, both in terms of the product itself and labor costs to install it. Part of the savings stems from the fact that vinyl is much easier to cut, work with, and install.