How do you ignite a pilot light on a Rheem water heater?

Push down the red button to the left of the gas knob. Hold the red button down while pressing the piezo ignitor striker, found to the immediate right of the gas knob, repeatedly until the pilot is lit. You can see the pilot light through the viewing window on the water-heater’s inner door.

How do I reset my Rheem pilot?

How do you reset the pilot light on a electric water heater?

1. Open the door/cover over the pilot light access.
2. Use a flashlight or a headlamp to find the burner inside.
3. Turn the gas knob to “Pilot,” press and hold it down.
4. While still holding the gas down, light that pilot.

Where is the reset button on Rheem water heater?

The reset button on a Rheem water heater is the red button located in the center of the limit switch just above the water heater thermostat.

What to do when pilot light goes out on Rheem water heater?

If the pilot light goes out when you release the red button, repeat steps four and five. If you smell gas at any time while you are lighting your Rheem water-heater pilot light, leave your home immediately and call your gas provider’s emergency phone number from another location.

What kind of pilot light does gas water heater use?

Note that most of the older and economy gas water heaters are equipped with the pilot, while newer, advanced models utilize piezoelectric sparks or a hot surface igniter which is more durable and reliable.

Why is the pilot light on my water heater not working?

water heater pilot light won’t stay lit – most common problem for gas water heater. the water heater thermocouple is a safety device to prevent gas leak. It cut off the gas when there is no flame inside the heater. In this video I show how I replaced the water heater thermocouple . Although this is an easy fix it must be done with caution.

How to fix a pilot light on a gas furnace?

Turn the gas knob to the pilot setting, press it in and hold it, light the pilot while holding the gas knob down for a minute. Release the gas knob and turn it to the ON position. To make sure the gas heater is working properly, turn up the thermostat and see if the heater heats up.

Where is the pilot light on a Rheem hot water heater?

It is a small, bulb-shaped device located near the pilot aperture. When it is working properly, it generates a small electrical current to keep the gas valve opened when heated by the flame. A common problem with Rheem water heaters is a loose thermocouple that falls slightly out of position.

What to do when the pilot light goes out on a gas water heater?

You should hear another clicking sound. Do this several times and the pilot should relight. Wait for one mintue while holding the red button and then release it and the light should stay on. If the light goes out, try it again. After 3 tries, if the light still goes out then your gas water heater may need professional service.

What kind of water heater does Rheem use?

Rheem ® offers a complete line of heavy- and light-duty commercial water heaters for all your commercial water heating needs. Our products feature the most diverse tank components in the industry. From glass-on-steel to stainless steel to polybutylene, Rheem Commercial Water Heaters can meet your hot water demand.

Where can I get a relight water heater?

Our end-to-end property management service simplifies transparent rental experiences between renters and owners, managing everything from showings and lease signings to rent payments and maintenance. Based in San Jose, CA and serving the San Francisco Bay Area, San Diego, Los Angeles, Riverside, Orange County, Denver, and Seattle areas