How do you change a kitchen sink faucet?

Climb under the kitchen sink and look where the sprayer and faucet are mounted (Figure 2). Count the number of holes that are being used by the faucet. Comment: The faucet shown in the picture is held in place by two plastic nuts, one on each side, and by a long shaft nut in the middle.

How is a kitchen sink faucet held in place?

Comment: The faucet shown in the picture is held in place by two plastic nuts, one on each side, and by a long shaft nut in the middle. The sprayer is held by another plastic nut. There are a total of 4 kitchen-sink holes available. Tip: While under the sink try to figure out which tools will be best to use.

When do you have to replace a kitchen faucet?

Sometimes the old shutoff valves under the sink are so corroded or gummed up with deposits that they no longer work or they leak. If you encounter this, you will have to shut off all water at the main shutoff and replace them. If you are doing so, it is well worth the money to spend an extra couple dollars for a ball valve.

How do you remove a side sprayer from a kitchen faucet?

If you want to eliminate a side spray hose, remove the old sprayer from the old faucet and remove the hardware around the hole in the sink that it came out of. Clean off the buildup of hard water around this hole and insert a chrome button that snaps in place. Most plumbing supply stores carry these buttons in a variety of sizes.

How do you remove an old kitchen sink faucet?

Once the water is off, removing the old faucet is a matter of loosening the nuts that hold it in place (from beneath the sink) and then lifting the faucet out of the holes. Unfortunately, this step can be easier said than done.

What to look for when replacing a kitchen faucet?

If you’re replacing the kitchen faucet in your existing sink, look underneath the sink to see how many holes it has (usually between one and four). This determines the type of kitchen sink faucets that’ll work with your sink — whether single or double handle and with or without accessories like a sprayer or soap dispenser.

How do you turn on a kitchen faucet?

Turn on the faucet to relieve pressure in the lines. Turn off power to the disposal, if applicable. Snap a picture of the plumbing configuration before disconnecting to use as a reference later. Use a small bucket under the connections to catch water as you disconnect supply lines.

Do you shut off the water before replacing a kitchen faucet?

Always shut off the water before replacing a kitchen faucet. Before the work can start in earnest, you’ll have to shut off the water to the existing faucet.