How do you change a Danze shower cartridge?

Hold the stem of the cartridge and pull up until the cartridge is completely removed from the faucet body….Danze – How To Install A Cartridge – Tub / Shower – 1 Handle – Pressure Balanced – Ceramic Disc Cartridge

1. Remove the old cartridge.
2. Install the new cartridge.
3. Test for leaks.

How do you replace Danze ceramic cartridge?

Locate the locating pins on the bottom of the cartridge and locate the corresponding holes in the faucet body. Insert the cartridge and rotate it until it slides down into place….In order to install a ceramic disc cartridge, you must:

1. Remove the old cartridge.
2. Install the new cartridge.
3. Test for leaks.

How do you take apart a Danze shower valve?

For Shower:

1. Unscrew the index button (part #1) counter clockwise, then pull it out.
2. Unscrew the set screw (part #2) counter clockwise using Philips or flat screw driver.
3. Pull out the lever handle (part #3).
4. Then unscrew the canopy (part #4) counter clockwise.

How do you fix a leaky Danze faucet?

If your faucet is leaking near the handle, or drips from the spout, you must tighten the lock nut that holds the cartridge in place. If this does not solve the problem, try removing, cleaning and re-installing the cartridge. If neither of these steps resolves the problem, the cartridge may need to be replaced.

How do I fix my Danze faucet?

Are Danze faucets good quality?

Danze/Gerber faucets are of good to very good quality using some of the best components available for faucets, including good to excellent ceramic cartridges. Unlike many large faucet manufacturers, Globe Union does not use proprietary ceramic cartridges available only from the company.

Does Danze have a lifetime warranty?

All non-electronic parts of the Danze faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship, for as long as the consumer purchaser owns it.

How do you remove a cartridge from a Danze faucet?

Position the tool on the flat sides on the cartridge or lock nut so the threads will not get damaged. Please note: Before removing the cartridge, you must turn off the water supply to the faucet. Once the water supply has been turned off, you are ready to begin working on your faucet. 1. Turn the water supply off to the faucet 2. Remove the handle

What kind of shower head does Danze use?

Pressure Balanced Shower Trim Package with Single Function Shower Head From the Cape Anne Collection (Less Valve) Pressure Balanced Shower Trim Package with Single Function Rain Shower Head From the Mid-Town Collection (Less Valve) Pressure Balanced Tub and Shower Trim Package with Multi Function Shower Head From the Antioch Collection (Less Valve)

How do you remove a cartridge from a shower?

To remove the cartridge, begin by removing the base nut, followed by the sleeve. b. Hold the stem of the cartridge and pull up until the cartridge is completely removed from the faucet body. a. Locate the locating pins on the bottom of the cartridge and locate the corresponding holes in the faucet body.

How to install a ceramic disc shower cartridge?

Re-install the base nut and hand tighten. Once all of the parts are re-installed, turn on the water supply for the faucet and let the water run for approximately 10 minutes. If you notice that water is leaking from the ceramic disc cartridge, tighten the base nut and test again.

Where can I get replacement Danze faucet cartridges?

Replacement parts and cartridges for your Danze products can be found right here. Not sure which cartridge you need? Don’t stress! Your friends at PlumbingSupply.com ® have a handy reference for you, including help with finding your model number. Installed items are non-returnable.

What kind of valve do I need for Danze shower?

Please note that Danze valves and trim are often interchangeable. For instance with a Danze shower only set you may have the D112000BT valve with stops or the D115000BT valve without stops. Most tub and shower combinations use the D113000BT valve, but some use a thermostatic valve instead.

Where are the labels on Danze kitchen faucets?

Since 2010 Danze has put a label on faucets to help identify the product after installation. Look for labels on the underside of the handle canopy, attached to the supply hose, attached to in-wall valves, or behind the valve escutcheon on in-wall valves. Single Handle Kitchen Faucets.

To remove the cartridge, begin by removing the base nut, followed by the sleeve. b. Hold the stem of the cartridge and pull up until the cartridge is completely removed from the faucet body. a. Locate the locating pins on the bottom of the cartridge and locate the corresponding holes in the faucet body.