How do I unclog my main line?

How to clean out a main sewer line clog

1. Step 1: Loosen the cap on the drain pipe. Loosen the cap on the drain pipe.
2. Step 3: Feed the auger cable into the drain pipe.
3. Step 4: Run the auger until the clog is clear—and beyond.
4. Step 5: Hose down the pipe and auger cable.
5. Step 6: Slowly pull the auger back out of the pipe.

What does it mean if your sewer line is clogged?

But if this isn’t able to resolve the issue, you likely have a sewer clog. Your sewer pipe (also called a main drain line) begins where the pipes exit your home, and travel to either the city sewer pipe or your septic tank system. A sewer main line clog is more serious for several reasons.

How to clean a main drain line blockage?

1. Loosen the Drain Pipe Cap The first step is to find your main drain cleanout location. It usually looks like a small pipe that sticks about 10 to 12 inches vertically out of the ground. Use the pipe wrench to loosen the cap.

Which is the most common place for drain clogs?

While the toilet is probably the most common place where clogs originate, they can start, build and disrupt function in and from any location in the system. A blockage can build and lodge itself anywhere, but analysis will help narrow down the possibilities. You’ll be able to see what’s happening and what exactly the problem affects.

What causes something to get stuck in a subline?

If something is stuck in one of the sublines, whatever is happening will more than likely be isolated to one area or section of the building. Here are the most common causes of blocked drains: Tree roots are widely recognized as the number one cause of blockage and clogs in water and sewer mains.

But if this isn’t able to resolve the issue, you likely have a sewer clog. Your sewer pipe (also called a main drain line) begins where the pipes exit your home, and travel to either the city sewer pipe or your septic tank system. A sewer main line clog is more serious for several reasons.

1. Loosen the Drain Pipe Cap The first step is to find your main drain cleanout location. It usually looks like a small pipe that sticks about 10 to 12 inches vertically out of the ground. Use the pipe wrench to loosen the cap.

While the toilet is probably the most common place where clogs originate, they can start, build and disrupt function in and from any location in the system. A blockage can build and lodge itself anywhere, but analysis will help narrow down the possibilities. You’ll be able to see what’s happening and what exactly the problem affects.

If something is stuck in one of the sublines, whatever is happening will more than likely be isolated to one area or section of the building. Here are the most common causes of blocked drains: Tree roots are widely recognized as the number one cause of blockage and clogs in water and sewer mains.