How do I reset my Whirlpool smart hot water heater?

Press the small reset button in the center of the thermal switch. If it’s tripped, you may be able to hear it click. Even if you do not hear the thermal switch click, try lighting the pilot using the instructions on the water heater’s label.

How do I convert my smart water heater to ordinary water heater?

To convert: remove the thermistors, add ordinary thermostat, and re-wire for non-simultaneous operation. Cut back foam insulation with wallpaper knife/ wear eye protection. Use same elements that come with tank. Yellow and blue wires going to upper elements from top of tank do not need to be replaced.

How do you unlock the energy on a smart water heater?

1. Unlock the water heater’s user interface (if it is locked). To do so, touch the lock button for at least 5 seconds. The Lock icon will disappear from the screen.

Does Dometic own Atwood?

In 2014 Dometic purchased Atwood Mobile Products to complement and bolster Dometic’s robust product line.

Can you bypass a thermostat on a hot water heater?

Bypassing the thermostat on a water heater is not adviseable. It may burst and do unforeseeable damage and injury.

What does eo2 mean on a hot water heater?

E02 means that your high limit thermostat has tripped on your water heater. If the water is way too hot, then your thermostat needs to be replaced. If the water is not too hot but you’re getting an E02 error, your high limit thermostat needs to be replaced.

How does an energy smart water heater work?

Energy Smart® Water Heaters use an electronic control system which has self-diagnostics and four operating modes including an energy saving mode. The Energy Smart® Mode setting provides for the best energy efficiency. When installing an Energy Smart® Water Heater, the Control Board must be kept dry.

What should I Cover my water heater control board with?

When installing an Energy Smart® Water Heater, the Control Board must be kept dry. Cover the control board with plastic wrap while you are making plumbing connections and filling the tank.

How does the energy smart control board work?

The Energy Smart® Control Board has a flashing LED light which flashes trouble codes. The Installation Instructions have a Diagnostic Code Chart and a Troubleshooting Chart you can use to identify and correct problems.

How to troubleshoot a whirlpool energy smart water heater?

The Installation Instructions have a Diagnostic Code Chart and a Troubleshooting Chart you can use to identify and correct problems. If the LED light on the Control Board is not on, check to make sure the unit is getting electrical power. You can check for power with a simple “circuit tester” or volt meter.

Energy Smart® Water Heaters use an electronic control system which has self-diagnostics and four operating modes including an energy saving mode. The Energy Smart® Mode setting provides for the best energy efficiency. When installing an Energy Smart® Water Heater, the Control Board must be kept dry.

When installing an Energy Smart® Water Heater, the Control Board must be kept dry. Cover the control board with plastic wrap while you are making plumbing connections and filling the tank.

The Energy Smart® Control Board has a flashing LED light which flashes trouble codes. The Installation Instructions have a Diagnostic Code Chart and a Troubleshooting Chart you can use to identify and correct problems.

The Installation Instructions have a Diagnostic Code Chart and a Troubleshooting Chart you can use to identify and correct problems. If the LED light on the Control Board is not on, check to make sure the unit is getting electrical power. You can check for power with a simple “circuit tester” or volt meter.