How do I reset my Rinnai Infinity?

To reset the heaters follow the steps.

1. Turn off all hot water taps.
2. Turn off supply to secondary circulating pump or alternatively, if heater and pump.
3. Turn on heater at remote control.
4. Select required temperature.
5. Switch on supply to secondary circulating pump or open valve on pump flow.

How do you reset a tankless water heater after a power outage?

Try resetting the thermostat by first bringing it down to zero. Wait for a couple of minutes and take it to the desired temperature. Hopefully, your water heater not working after power outage should be resolved. If this does not work, the chances are that you may have to replace the thermostat itself.

Is the Rinnai Infinity 32 continuous flow hot water system?

Designed to provide luxurious instant hot water for larger homes with 2-3 bathrooms (2-4 in warmer climates), the Rinnai Infinity 32 Continuous Flow is unparalleled in performance and eco-efficiency.

Why is my Rinnai hot water not working?

Your hot water is suddenly cold and the thought of having a shower now fills you with dread. Prior to booking a service call with Pure plumbing, here are a few Rinnai specific troubleshooting hints tips to go through before you call our hot water plumbers. My Rinnai Hot Water System has no hot water?

What should I do if my Rinnai controller is not working?

If a controller is fitted check that it is on also) Check gas supply (Turn gas stove top on then turn hot water tap on. If flame drops on stove this shows it is possibly a gas supply issue) Is there enough water flowing? (Try opening tap further or turn another tap on as well) Are there any error codes displayed on controllers?

Why is my Rinnai Infinity Range not working?

Dirty Flame rods can cause it, Low Flame. The 12 is the Error Code for Low Flame/Gas pressure. hu Karen B, error 12 does indicate an issue with the gas supply to the unit. We would recommend calling our Technical Help Desk on 1300 555 545 option 3 to discuss further.

Is there hot or cold water in Rinnai Infinity 32?

They can be reached on 1300 555 545 (option 3). This hotel has a Rinnai 32 & occasionally there is no water (hot or cold) coming out of the hot taps anywhere in the hotel & the cold water pressure is ok. At one time it happened at 8 am & then an hour later the water was hot & plenty of pressure.

Why is my Rinnai Water Heater not working?

Rinnai error code 11 is an indication that there is no ignition in, or no gas supply to, your hot water system. You can try the following to fix the problem: Check your hot water system for any visible damage or loose parts. Locate your gas supply and ensure it is turned on.

If a controller is fitted check that it is on also) Check gas supply (Turn gas stove top on then turn hot water tap on. If flame drops on stove this shows it is possibly a gas supply issue) Is there enough water flowing? (Try opening tap further or turn another tap on as well) Are there any error codes displayed on controllers?

How many litres of water does the Rinnai 32 deliver?

The Rinnai 32 is capable of delivering 32 litres of water per minute when connected to a controller which is set on 40o C, ½” copper tube has a maximum delivery capability of 17 litres per minute. When the pipes are too small, when a second tap is turned on the water flow changes and the hot water can go cold.