The little remote for my fan ( Hunter Signal wifi fan) actually can reset the wifi on the fan. Open the back and press the ” Pair” button untill you hear a loud beep and the 2 front blue lights light up. If you press a quick tap it will pair the remote to the fan.

How do you reset a ceiling fan?

To resync your ceiling fan remote, start by turning off your fan using the wall switch and then waiting for a few seconds. Different guides will tell you to wait anywhere from 10-30 seconds while the fan is off. After waiting, turn the fan back on again.

Why is my Hunter Fan remote not working?

Perhaps the most common cause for a ceiling fan remotes not working is either a lack of batteries or dead batteries. If your remote control has an indicator light, check to see if it comes on. … Open the remote control battery cover. Make sure it has batteries and that they’re in the correct position.

Where is the DIP switch on a Hunter ceiling fan?

The DIP switches are under the battery compartment on the remote and are on the flat side of the receiver.

Can I control my Hunter ceiling fan with my phone?

The easy to use Hunter SIMPLEconnect® app gives you the freedom to control your Hunter SIMPLEconnect® Wi-Fi fans from the palm of your hand. Download the SIMPLEconnect® app and start controlling your comfort from your smart phone or tablet. … Please contact [email protected] for more information.

Why did my ceiling fan stop working?

If your ceiling fan stopped working or is not turning on, it could be because it isn’t receiving any electricity. This could be because the circuit breaker has tripped or is off. … Your ceiling fan could also stop working due to internal defects namely shot ball bearings or an overheated motor.

What is DIP switch settings?

A DIP switch is a small switch in a DIP (dual in-line package) whose position changes the operating mode of a device. DIP switches help configure computer peripherals, such as hard drives, modems, sound cards, and motherboards.

Can Hunter Fans work with Alexa?

With the “Hunter – SimpleConnect Smart Ceiling Fan” skill and Alexa, you can now interact with your Hunter Fan devices by voice. … * Create an Alexa group, like Bedroom or Downstairs, and add the device to the group.

Where is the receiver on a Hunter ceiling fan?

The receiver is usually tucked into the fan’s mounting bracket, which is connected to the electrical box.

How do I stop my Hunter fan from beeping?

On select Hunter fans, the control system is designed to “beep” when a button is pressed on the remote control. The reason is so the user will know the command has been received by the fan. There is no way to turn off the audible beep. Thank you for the feedback.

Article first time published on

Why does my fan work but not the light?

When you discover a ceiling fan light doesn’t work, confirm that electricity is reaching the room. Test your fan to see if the blades rotate when turned on. If the blades turn, check the switch that controls the ceiling fan light. … Reset the breaker and then test the ceiling fan light and blades.

How do you tell if a DIP switch is on or off?

A DIP switch facing upwards is “on”, while a DIP switch facing downwards is “off”. DIP switches 1 through 5 are used to determine which address that the 4219 will be set to.

What does a DIP switch look like?

DIP switches are typically presented as a row of tiny toggle (on/off) switches, rather like a series of miniature standard light switches, mounted sequentially on a block of heat-resistant thermoplastic polymer.

How would you confirm that a DIP switch is working properly?

The DIP test allows you to verify the current settings of the DIP Switch on the Frame CPU board (4810AR-002). To confirm this test, you must remove the Frame CPU board to verify the setting of the DIP Switch. Contact Ross Video Technical Support before attempting to change any DIP switch setting on the Frame CPU board.

How do you fix a fan that won't turn on?

1. Check the Cord. It sounds simple, but your first step should be to make sure the cord is securely plugged in. …
2. Check Your Circuit Breaker. …
3. Check for Power to Your Outlet. …
4. Check the Fan Fuse. …
5. Replace the Cord. …
6. Clean the Fan. …
7. Grease the Motor. …
8. Call Customer Support.

How long does a Hunter ceiling fan last?

You can expect a ceiling fan to last 6 to 10 years, with an average of 8 years. Most ceiling fans today are sealed units, but some require an annual addition of oil at a port on the top of the the motor housing near the downrod.

Why are my lights blinking on my ceiling fan?

Ceiling fans produce vibrations when operating, so if the light bulbs are loose or not screwed in all the way the lights may flash on and off. Check the light bulbs to see if they are loose or they wiggle while in the socket. Gently but firmly screw the light bulb into the socket if it is found to be loose.

Why does my ceiling fan light go on and off?

The main reasons behind a ceiling fan light turning ON by itself could be faulty wiring or due to similar signals received from another remote control nearby. A ceiling fan light may turn ON by itself when there is a defect in its wiring circuit.

What does a limiter do in a ceiling fan?

The light produced by a ceiling fan is dim -Apart from making the lights go entirely off, the limiter also makes the light dim as watts of power are conserved; hence the amount of light energy given is quite limited.

What is the black and white wire on a Hunter ceiling fan?

The black wire is the hot wire that leads to the switch. The white wire is neutral and completes the electrical circuit. Copper or green wire is the ground wire and keeps the fan from experience power surges.

Where is the HomeKit code on Hunter fan?

On the add accessory screen you will need to scan the HomeKit setup code, which can be found on the inside of the remote.

Can Alexa control my ceiling fan?

ALEXA AND GOOGLE-CERTIFIED – This device is certified by Amazon and Google to work with Alexa and the Google Home Assistant. Control your ceiling fan with voice commands. … Simply plug in the BOND device, download the app to your phone, point your fan remote at the BOND, and you’re done!

How do I connect my smart ceiling fan to Alexa?

Connect your fan to Alexa. Connect your other lights and/or switches to Alexa. In the Alexa app, open the menu and tap Smart Home. Under Groups, create a group that includes your fan and the other smart home devices you want to work together.