How do I remove an old diverter valve?

Diverter Valve on a Three-Valve Shower

1. Loosen the screw on the handle.
2. Unscrew and remove the handle.
3. Remove the sleeve over the diverter.
4. Remove the diverter using a socket wrench.
5. Unscrew the set screw.
6. Unscrew spigot from the wall.

Is there a problem with the shower diverter?

You have a shower diverter problem. We’ve all been there; it’s like trying to wash your hair with an eyedropper while your feet get saturated. The tub spout you have with the knob on the end of it is a shower diverter. The knob diverts water away from the tub spout and up to the shower head.

Do you have to replace the diverter stem?

Otherwise, replace the diverter stem completely. You’ll need to take the old stem to the plumbing supply store so you can be sure to get an exact replacement. The new diverter valve slips right into the pipes just like the old one that you pulled out.

Can a seat washer be replaced as a diverter?

Make sure to use the correct size and shape of seat washer and press it firmly into the stem’s retainer. If the diverter valve is in good shape, you’re ready to reassemble the shower handles and test your faucet. Otherwise, replace the diverter stem completely.

How long does it take to replace a shower diverter?

In your case, the diverter needs to be replaced. This repair is easy and inexpensive. If all goes well, there will be plenty of water coming out of the shower head in about 30 minutes. Since the diverter is built into the tub spout, you must replace the entire spout.

Why is my shower diverter not working properly?

Common Problems with Diverter Valves. As tub diverter valves age, they become worn. Sediment also builds up, causing the valve to malfunction. If the valve cannot turn all the way to block the tub faucet, there will be less pressure to push the water up the pipe to the shower and water will be coming from both the shower and the faucet.

Otherwise, replace the diverter stem completely. You’ll need to take the old stem to the plumbing supply store so you can be sure to get an exact replacement. The new diverter valve slips right into the pipes just like the old one that you pulled out.

What kind of diverter do I need for my shower?

This is the most common type of diverter valve and is commonly called a 3-valve diverter or tub diverter valve. These types of valves can also be a 2-valve or tee diverter (the difference will be explained later). Another type of shower diverter is located on the shower head itself and is usually seen in showers…

Make sure to use the correct size and shape of seat washer and press it firmly into the stem’s retainer. If the diverter valve is in good shape, you’re ready to reassemble the shower handles and test your faucet. Otherwise, replace the diverter stem completely.