How do I identify Moen parts?

The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

How do you tighten a loose faucet spout?

Slide the tip of a flat-head screwdriver under the edge of the cap. Lift gently with the screwdriver to remove the cap from the faucet handle. Tighten the setscrew — located under the cap — clockwise to tighten the handle. Push the decorative cap over the opening when the handle is tight.

How can you tell when Moen parts need to be replaced?

The best way to figure out what replacement part or accessory you need is if you know the “Model Number” of your Moen product. Once you know this, the replacement part or accessory can be identified using the product’s “Exploded Parts View” pdf document that can be found on the product’s website page.

How can I repair a Moen tub spout?

Loosen the Hex screw until the tub spout slides off. For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing. The faucet guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product.

Where to find series number on Moen single handle spout?

Single/Two Handle The series number may be stamped on the back side of the spout, near the base where it swivels on the sink. If you point your spout aerator (where the water comes out) so that it is facing the 3 o’clock position, the series number should be located on the opposite side at the 9 o’clock position.

What kind of parts do Moen faucets use?

Replacement parts, filters, cartridges and accessories are just a click away. Genuine Moen parts are designed to extend the life of your faucets. Your Moen faucet or shower head may also work with specialized parts and accessories for optimal performance.

How do you remove tub spout from Moen faucet?

Unthread the tub spout counter-clockwise to remove. Loosen the Hex screw until the tub spout slides off. For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing.

Single/Two Handle The series number may be stamped on the back side of the spout, near the base where it swivels on the sink. If you point your spout aerator (where the water comes out) so that it is facing the 3 o’clock position, the series number should be located on the opposite side at the 9 o’clock position.

What are the different types of Moen tub spouts?

1. Diverter or Non-Diverter 2. Metallic or Non-Metallic 3. Length 4. Connection Type (How the tub spout is secured) For warranty information, see article How to Identify if My Product is Warrantied. This article will explain how to identify a Moen tub spout by function, material, length and how it is secured to the wall.

The best way to figure out what replacement part or accessory you need is if you know the “Model Number” of your Moen product. Once you know this, the replacement part or accessory can be identified using the product’s “Exploded Parts View” pdf document that can be found on the product’s website page.