How do I clear error on Bosch dishwasher?

The most standard way to reset a Bosch dishwasher is simply to press down on the Start button for 3 seconds. The Start button is often labelled with “Reset” as well, or even “Reset 3 Seconds”. For most issues, like a frozen display, this will clear the settings and allow you to begin using the dishwasher again.

How do you clear a Bosch error code?

How to reset an error code on a washing machine by Bosch, Neff, or Siemens. Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release.

What are the error codes for a Bosch dishwasher?

Bosch Dishwasher Error Codes and meanings

• Error E12: Limescale build up.
• Error E14: Flow meter failure.
• Error E15: Water in the base trough.
• Error E16 & E17: Water filling the system.
• Error E18: Water flow into the dishwasher.
• Error E22: Filter is blocked.
• Error E23: Issue with drain pump.

Why is my Bosch dishwasher blinking 01?

Error code 1 indicates a water sensor or filling error.

How do I fix my Bosch e25 error?

Filter. The first thing to do when an e25 error occurs is to check the filter inside the dishwasher and the pump impeller. If the code appeared during the dishwashing, prepare for the fact that there may be too much water on the floor.

What does error code 15 mean on a Bosch dishwasher?

An E15 error code indicates that the safety switch has detected water in the base of the dishwasher. Your leakage protection system has activated.

How do I fix the error code E15 on my Bosch dishwasher?

You have to drain water from the tray by tilting the device and then dry it. Usually, one day is enough to dry out well. After such manipulation with the machine, as a rule, the error E15 disappears, and the device continues to work as expected. If the error reappears, you have to correct a more serious fault.

What is E14 error in Bosch dishwasher?

An E14 error code indicates a flow meter failure or an issue with water flowing into the dishwasher or the filling system.

Why do I get errors on my Bosch dishwasher?

Bosch dishwashers have a built-in diagnostic system which lets you know if there are any issues with the dishwasher, the errors it gives, can indicate if you need a replacement or a check-up, but not many of us know what they mean, so here is what you need to know.

What is the phone number for the Bosch dishwasher?

An important message from our CEO Christofer von Nagel. Click here to read. Getting a dishwasher error code that is not listed below? If you couldn’t find your error code on the list, please contact Bosch Customer Service at 1-800-944-2904.

How does a Bosch dishwasher know when the water is full?

The measurement of water in this dishwasher is done by a flow meter, which is basically a little spinning paddle wheel in the water inlet pipe. It connects to the control board. If it doesn’t spin the dishwasher doesn’t know when it’s full, until it hits the safety float switch!

What to do when you get error code E5 on Bosch dishwasher?

If error code E5 is safety float water level reached, check the float and float switch, check if the water is in the base and check if the water inlet valve has re-seated after closing. To clear error codes, run the customer service test program.

Why is my Bosch dishwasher not starting?

The most common reason for your Bosch dishwasher failing to drain is a blockage, so the first step is to check the filter for any food debris causing an obstruction. With the dishwasher powered off remove the bottom dish rack to give yourself better access to the basin of the dishwasher.

What does error message H01 mean on Bosch dishwasher?

See, In Bosch dishwasher, H01 means that the dishwasher will start washing dishes after 1 hour, and H02 means after 2 hours. So its not an error but just an indication. All dishwashers have delayed start functionality and this is simply a message of it.

What is the warranty on a Bosch dishwasher?

Bosch has a decent warranty period for all the dishwashers it makes. Both labor and parts have a one-year warranty, the racks and electrical systems have a five-year warranty, and the tub and door liner have a lifetime warranty.

What does the E01 code mean on a Bosch dishwasher?

Bosch dishwasher error code e01. If a Bosch dishwasher displays the error code e01, it means the control panel is malfunctioning. But, do not hurry to buy a new board. If the dishwasher does not work at all or fails, the faulty control board is probably the case.