How do I clear E1 F9 code?

Filter clogged It picks up trash and small objects before they reach the pump, instigating error code E1 F9. To access the filter, unscrew and remove the front panel. Then gently turn it and remove it from the groove.

What does E1 F9 mean on Whirlpool washer?

F9 E1 Code in the display: This error code indicates that drain times are longer than expected, typically over eight (8) minutes.

Why does my washer keep saying E1?

When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water.

What does F9 mean on a washing machine?

The F9 error appears when there is an overflow. The Overflow condition will occur when the respective contact on the pressure switch closes and does not open for at least 60 seconds.

How do you fix E1 F9 error on a Maytag washer?

F9 E1 Code in the display: Is the drain hose properly installed?…Is the drain hose properly installed?

1. Make sure the drain hose is not kinked or clogged.
2. Use the U-shaped drain hose form on the drain hose.
3. The standpipe (drainpipe) height requirements are 96″ (244 cm) maximum and 39″ (99 cm) minimum.

How do I fix E1 error?

The Generic Approach

1. Turn off the air conditioner and unplug it.
2. Hold down the power button, and keep it depressed while you or someone else plugs it back in. Keep the button depressed while the fan and condenser cycle run briefly and cycle off again.
3. Unplug the air conditioner again and plug it back in.

Why is my Maytag washer says E01 F09?

So you’re exactly right, E01 F09 means you have a drain issue. There is a drain catch inside the washer that you will want to access and clean if you’re getting this drain error. To access the drain catch, tip the machine backwards and lean it against the wall at a 45 degree angle or so. This is your drain cap.

Where to find the E1 / F9 code for a whirlpool washer?

Please feel free to donate by going to my Channel or by visiting (click Pay Online) or cash app $JohnSpearsJr. This shows you a way to troubleshoot tour Whirlpool washer if your display shows an E1/F9 error code. You may also see a code for SD.

What does error code E1 F9 mean on Maytag washer?

Maytag 2000 Washer Displays Error Code E1 F9. Maytag 2000 Series is displaying… Maytag 2000 Series is displaying error code E1 F9. What does this mean and what should be done about it? Submitted: 8 years ago. Category: Appliance Hello. Thank you for choosing JustAnswer. I will be helping you with your question today.

What does the error code E01 F09 mean?

Whirlpool Washer Control Panel Diagram Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

What does F21 mean on a whirlpool front load washer?

Whirlpool front load washer Error code F21 identifies a DRAIN ISSUE. First try cleaning out the drain pump filter on the front bottom of the washer. Unscrew the cap and clean it out. This should fix the NO DRAIN issue on your Whirlpool Front Load Washer.