How do I change my Moen WiFi?

Reset Wifi Credentials

1. In the U by Moen app, select the shower you would like to update the WiFi password for.
2. Select Settings.
3. Select Reset WiFi Credentials.
4. On the U by Moen controller, press the temperature down button for 5 seconds until the technical information page displays.

How do you remove a Moen shower diverter?

Hear this out loudPauseAttach an appropriate sized deep-socket to a socket wrench, then slide the socket over the diverter valve. Use the socket wrench to turn the diverter valve’s stem assembly in a counterclockwise direction until the valve is free. Pull the diverter valve out of the wall to complete the removal.

How do I reboot my Moen?

Hear this out loudPauseUnplug AC Power Adapter cable from control box, wait 10 seconds, then reinsert the AC Adapter cable into control box to restart the system.

How do you turn on a Moen shower?

The volume control must be rotated counter-clockwise to turn the water on. The temperature (thermostatic) handle only adjusts the temperature….Solution

1. Rotate the handle to turn it on.
2. Both hot and cold water MUST be supplied to the valve to get ANY water from the unit.

How do I set up my you by Moen controller?

Start Your Controller: To begin, press the power button in the center of the button pad to start the initial setup process. You will be directed to the first setup screen. Select Language: Using the hot/cold arrow keys on the button pad to scroll up and down, select a language—English, French or Spanish.

How do I Turn on the shower on U by Moen?

There are two primary ways to start the shower from your app: With the U by Moen shower app open, simply push the power button within the app’s “Shower” tab to turn the shower on at the factory at the factory default setting of the primary outlet at 100 degrees (same as pushing the power button on the controller).

How can I change the time on my you by Moen?

However, within the mobile app, the language can be modified by going to the “Settings” tab. The next available option is to choose the proper time zone, which is needed to accurately display the date and time on the controller. Without a time zone selection, the controller will not display a date or time.

What should the water temp be on U by Moen?

The U by Moen shower valve will allow temperatures between 60 and 120 degrees. The default setting is 100 degrees. Select a desired water temperature (hotter or colder) by pressing the hot or cold arrow keys on the button pad. Each button press equals one degree of temperature change.

What should I do if my Moen control box is not working?

Try unplugging the power cable, waiting for a few seconds, and then plugging it back in. An unconnected device will be ready to establish a connection. If this does not work, try resetting the control box. Hold down for a few seconds with a paperclip. You should hear one beep immediately and then another one a few seconds later.

How can I Pair my you by Moen shower controller?

To pair the app with a second device, repeat the “Add a Device” process giving the additional controller a different name. Within the “Settings” tab, you can modify which icons appear on the controller as well as the mobile app to best represent each of your shower fixtures such as showerheads, hand showers, body sprays and more.

What happens if my Moen faucet goes out?

If your power goes out, the supplied battery pack will allow the faucet to work normally. Because most networks need power, your device may not be able to communicate to the Moen app or voice assistant. If your power goes out and you DO NOT have the supplied battery pack installed, you will not be able to use your Moen smart device.

What to do when Moen wont connect to WiFi?

Restart your device by taking a paperclip and hold down the reset button until you hear a single beep followed 3 seconds later by two consecutive beeps. Cannot find your Moen smart device in your Wi-Fi list? The Moen Smart device will only be ready to establish a connection for five minutes after power up.