Can I use a Delta trim kit on a Moen valve?

Yes, the trim has to match the valve. However, anything not associated with the valve (shower head and arm, outlet for handheld shower, sliding bar for handheld shower, handheld shower head and hose, towels hooks, towel bars, etc.)

How do I know which Moen valve?

If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one.

What’s the difference between Moen trim and standard trim?

The visual difference between the Original Moentrol Valve and the Standard Valve is the balancing spool (see red arrow) on the top of the Original Moentrol Valve. The Standard Valve does not have one. Although Moen no longer manufactures new trim kits to fit this valve, individual parts and trim pieces are available at 1-800-BUY-MOEN.

Do you need to install Moen’s shower valve adapter kit?

Just make sure you shut off your water supply if you do this optional step! While these valves are essentially the same, except the Moentrol has pressure balancing, the screw positions on the escutcheon plate are not. What does that mean? You need to first install Moen’s shower valve adapter kit!

Can you use Moen Posi temp trim kit?

Without this kit you will NOT be able to fasten the shower plate to the valve. And I’m sorry for the let down, but this adapter kit CANNOT be used to convert a Moen Posi Temp trim kit to Moentrol trim kit. In addition to the adapter kit, I’m using the Moen Kingsley Trim Kit which is specifically designed for the Moentrol Valve.

When did moentrol start using the standard valve?

Standard Valve: The Standard valve was introduced in the 1960’s and was used until the early 2000’s. This valve does not have a balancing spool like the Original Moentrol Valve. If the 145058 Adapter Kit is purchased, new Moentrol trim kits (see requirements below) are available for this valve. See below for installing the 145058 Adapter Kit.

What kind of trim kit does Moen use?

The MOEN Kingsley Trim Kit Only for moentrol Valves in Chrome features a style that combines sophistication with a touch of old-world charm. This trim kit incorporates the M-PACT common valve system. This trim kit requires MOEN valve 3510, 3520, or 3570 to complete installation.

Can a Moen valve be used with a Kingsley adapter?

Hello melissa and thank you for your interest in Moen products. The Moen T3111BN Kingsley 1-Handle Moentrol Valve Trim Kit in Brushed Nickel (Valve Not Included) can be used with a Moen Adapter kit, part number 145058 on an existing valve, providing the balance spool is not on the top of the valve.

How to replace Moen single handle shower valve cartridge?

The Moen Moentrol Pressure-Balancing Volume-Control Tub and Shower Valve with Stops – 1/2 in. CC Connection uses a Moen single handle replacement cartridge part number 1225/1225B. If you have additional questions, please call us at 1-800-289-6636; we are available Monday through Friday from 8:00 am – 7:00 pm Eastern Time.

Is the Moen t3111bn brushed nickel valve trim kit included?

The Moen T3111BN Kingsley 1-Handle Moentrol Valve Trim Kit in Brushed Nickel (Valve Not Included) can be used with a Moen Adapter kit, part number 145058 on an existing valve, providing the balance spool is not on the top of the valve. The older standard valves had the screw holes at 5 & 7.