Can I replace my Moen shower trim?

Moen has manufactured many types of shower rough-in valves including four types single handle shower valves. The trim kits are not interchangeable. It is important to first identify which valve is currently installed by looking at the escutcheon screw location and the handle operation.

Can you replace a shower handle without replacing the valve?

The handle and trim for the tub/shower controls can also usually be replaced without redoing any plumbing by using a universal replacement kit (available for most brands at home centers and plumbing supply stores).

How to repair a Moen shower / tub valve?

Step by step instructions on how to save hundreds of dollars on this easy to do repair. This particular valve did not let any hot water flow. The problem could have been one of many others, limited cold water flow, dripping, or others. I’ll show you how to replace the Moen cartridge – which has the entire inner workings of the valve. Loading…

Where is the Moen button on a shower?

Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. If you do not see this, the handle buttons have been replaced, or the “Hot/Cold” button is a lever (wall escutcheon). Look closely at the wall escutcheon. This is the plate around the “Hot/Cold” level that turns the shower water on.

What do you use to block a Moen shower drain?

Block the shower drain with a stopper or rag to prevents screws and other parts from falling down the drain. Use an Allen wrench to remove the set-screw at the bottom of the handle. Pull the handle straight outward to remove it. Set aside the handle and set-screw.

What’s the scald guard on Moen shower handle?

Turn the water on and test the faucet to make sure the valve gets cold first, then warmer as you rotate the handle. The temperature limit stop kit is the device behind the scald guard feature on some Moen shower valves. It limits how far the handle can turn in the hot direction to prevent accidental scalding.

What kind of shower valve is Moen faucet?

Moen shower valves and parts are known for withstanding the test of time. According to Faucet Fix, Moen is the third most popular faucet brand in the United States. With that in mind, if you have an old home with a bathroom that has never been redone or refinished, there is a good chance that it has a Moen shower valve.

How do you remove tub spout from Moen faucet?

Unthread the tub spout counter-clockwise to remove. Loosen the Hex screw until the tub spout slides off. For additional information on Moen products visit solutions.moen.com and select the type of faucet you are repairing.

Block the shower drain with a stopper or rag to prevents screws and other parts from falling down the drain. Use an Allen wrench to remove the set-screw at the bottom of the handle. Pull the handle straight outward to remove it. Set aside the handle and set-screw.

How do you remove retaining clip from Moen shower?

To remove the retaining clip, use a pair of needle-nose pliers or a flat screwdriver. Grip the top of the clip and pull it straight out. Set the retaining clip aside; you will use it with the new cartridge. Continue to 5 of 9 below.