Can a pressure assist toilet be changed out?

In this scenario, Flushmate offers a change-out kit, which allows you to upgrade the flushing system in your toilet to have Flushmate pressure-assist components. This change-out kit works only on a specific selection of tanks from other pressure-assist toilets.

How do you remove pressure from a toilet?

Shut off the water by closing the shutoff valve on the water supply line under the toilet. Empty the toilet tank by flushing. This will remove the pressure from the pressure tank inside the toilet tank. Disconnect the water line that extends into the pressure tank from the water inlet valve.

How does a pressure assisted toilet flush water?

This compressed air then forces the water down into the bowl. The only way to change the flushing components in a toilet tank with pressure-assisted components is if the toilet is already a pressure-assisted toilet.

What to do when your pressure assisted toilet is leaking?

Flush a couple more times to help drain the pressure tank of any residual water. From outside the toilet tank, disconnect the water supply tube that is attached to the tailpiece of the water inlet valve, located usually on the bottom left side of the toilet tank. Continue to 3 of 6 below.

How do you replace a pressure assisted toilet?

You may need to remove the pressure tank from the inside of the toilet tank in order to put in the new tank bolts. To do this, unscrew the large plastic mounting nut off the tailpiece of the pressure tank where it extends through the bottom of the toilet tank.

What kind of toilet has a pressure assist Tank?

The tanks of pressure-assist toilets are specially designed for the pressure-assist units that both contain and force the water down into the bowl. The tanks of gravity toilets are designed for different components.

Where is the water line in a pressure assisted toilet?

Remove the water line that extends into the pressure tank from the water inlet valve. Flush a couple more times to help drain the pressure tank of any residual water. From outside the toilet tank, disconnect the water supply tube that is attached to the tailpiece of the water inlet valve, located usually on the bottom left side of the toilet tank.

Can a gravity toilet be used with a pressure assist toilet?

The tanks of pressure-assist toilets are specially designed for the pressure-assist units that both contain and force the water down into the bowl. The tanks of gravity toilets are designed for different components. These two tank designs are not interchangeable.