Can a broken Moen cartridge be pulled out?

The broken cartridge is not easy to get out and Moen makes a Moen Cartridge Puller that you can use to pull the valve out. However, the valve puller screws into the shaft of the valve stem, which in our case broke off (pic below).

How do you fix a stuck Moen shower cartridge?

Now that the bolt has threaded into the moen shower cartridge, use your wrench to turn clockwise tot he right, and soon your stuck moen 1225 cartridge will be a stuck cartridge no more. As you continue to turn the bolt with the wrench, it will draw the stuck Moen cartridge toward the front of the valve opening.

What to do with broken Moen bathtub valve?

The broken cartridge is not easy to get out and Moen makes a Moen Cartridge Pullerthat you can use to pull the valve out. However, the valve puller screws into the shaft of the valve stem, which in our case broke off (pic below). So I wasn’t able to use the Moen Valve Cartridge Puller.

What’s the replacement cartridge for a Moen faucet?

Cartridge 1224 – Two-handle replacement cartridge (hot or cold). Watch the 1224 Cartridge Removal & Installation Video. Please note that your cartridge may have an imbedded cartridge nut that is not shown on the video. Refer to the documentation that came with your faucet.

How do you remove cartridge?

The usual procedure for removing a cartridge is to unscrew the handle, and after turning off the water, pull out a retaining clip. In the best of circumstances, you then grip the cartridge stem with pliers and pull, and the cartridge should slide right out.

How do you remove a faucet cartridge?

To remove the cartridge from your faucet assembly, first use a flat-headed screwdriver to carefully pry the cover from the handle. Using a Philips screwdriver unscrew the handle screw. Pull the handle off from the faucet and pull the limit stop off.

How do you use a Moen cartridge puller?

The puller is designed to make use of the same threaded screw opening that the faucet handle was attached to. Continue to 5 of 5 below. Now that the Moen cartridge puller is attached, remove the cartridge. Hold onto the handle and twist the puller back and forth, clockwise and counterclockwise, as it’s being pulled.